Ski-Doo Snowmobiles Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
My sled ran fine over summer, just to keep fresh gas going to carbs, went to pull over this winter and nothing, no spark.. tested stator and it's fine... Replaced external coil pack with plug wires connected and still no spark..... HELP!!!!!! Was wondering if there's another coil I'm missing??? I'm hoping it's not a wire harness issue
 

·
Registered
Joined
·
49 Posts
Did you test beyond the stator because this is only 1 component required for spark to happen. Testing must be done in order.
1. Kill switch and tether 2. Stator. 3. Trigger Coil
4. CDI (mpem) 5. Ignition Coil.

If the stator is not supplying ignition voltage or if your trigger coil dead, there will be no signal to the CDI telling it to fire..and consequently no signal to the ignition coil connected to your spark plug. Ignition system fires in order.
 
1 - 5 of 5 Posts
Top