Hey! I'm rebuilding the drive wheels on my 61 tin cab. But i cant figure out what dimensions for the bearings and oil seals. in the parts catalouge they are listed as "SK-17, 405 4001 Drive axle bearing" and "SK-18, 570 0404 Chain case bearing seal", cant find anything that coresponds. Anyone...

I had been looking for a belly pan for my 1980 7500 Blizzard. This has been a hard piece to locate. Does anyone know of one or have any ideas where I could look. Thanks

1968 Ski-Doo (Bombardier) Olympique 250cc. This sled was originally bought by my grandfather in '68 and years later was traded away. Thankfully he never lost track of it and bought it back a few years ago. This was a every nut and bolt restoration that has had over 250 hours poured into it. This...

What would you pay for this package? Two 1989 MX - one is a MXLT and the trailer. Edit: They are asking $2500 for the package. They seem to have spent their lives together. I have not heard them run, yet, but everything is there and appears to be in good shape. They both have around 1700...

Hi all, I've just recently purchased what I believe to be a 1994 Mach 1 670 inside a 1994 Mach Z 780 chassis. What i'm confused by is the VIN number on the side. This number isn't matching up to any database I can find for 90s Skidoo sleds. The VIN on the sled is 3877 00338. This is the only...

Hi all, I've just recently purchased what I believe to be a 1994 Mach 1 670 inside a 1994 Mach Z 780 chassis. What i'm confused by is the VIN number on the side. This number isn't matching up to any database I can find for 90s Skidoo sleds. The VIN on the sled is 3877 00338. This is the only...

Hey there sled heads, first timer here with a question about an old,1976 according to the ownership, rv340 free air. This thing has been altered for the track. I'm rebuilding the engine and found not stock or anything close to stock pistons in the old girl. I think someone was cheating. The...

Hello everyone, So I picked up, what I have concluded is a 1965 Olympique. This sled is in really good shape. Engine turns over fine and the original owner told me that if I dumped gas in her she'd fire right up. I got this for a song ($150). I can't wait to do the restore. I just finished up a...

I inherited a box of things from my uncle and in that box was this brass oval plate that says Bombardier in the center, with this on top: Ser. 4249 on it. Can anyone tell me more about it and what it might have been on and how old it is? I am very curious, I didn't know my uncle that well but...

My 1972 TNT is For Sale for $1000 firm on price need the money, Sled ran great when I put it in the shed for the summer, i fogged the engine. Great track new drive and rear drive sprockets. Pick up only

Picked up a 79 Blizzard 7500+ last week. Hadn't run in years so I pulled it in the shop and flushed the fuel tank, new lines and filter, cleaned the carbs and put new plugs in. It run excellent but after my first rip around the farm it got tight on me. Got it back to the shop; when I jack up the...

I am a newcomer to vintage Ski Doos and can use help on TRA setup. I have created a custom vintage sled. It's a 1975 245RV that has been modified with an independent front suspension and made into a liquid cooled 1978 6500 Blizzard motor (340 cc.) It's all parts from swap meets. I got it...

I had just recently bought a Formula 3 600 triple its a 1996, the guy i bought it from said that it started burning coolant on the trail and he shut it down as soon as he smelled it burning coolant. the mag side cylinder was the problem. I replaced all of the top end seals including the base...

New Market Snomads vintage show and beer bash at the Double wide in New Market, MN bonfire, food n games n lots of beer. January 13th 2018 11am. Open to all for show, so bring your vintage ( leaf spring ) sled and family down to the Double wide.

Hi - I just purchased a 1969 skidoo olympic 320E. I am trying to locate the following parts, etc. 1) "plastic" clutch belt guard 2) plastic cover and emblem that mount to airbox 3) plastic yellow cover that goes over front light - current one has a crack across it 4) shop floor manual...

Selling off two project sleds out of my collection. First is a 76 250 RV with a 340 motor, has 120 compression on both but no spark. Pretty well complete sled that comes with a spare clutch and motor mount plate. Second is a 77 340 RV has 100 compression on both and spark on one cylinder...

okay so i bought a 1977 ski doo Everest 440 that ran but would not turn the pto. i fixed that problem by replacing the points and spark plugs. Then it ran great till it ran for 10 minutes and started to bog out no matter how much throttle i gave it. After inspecting the spark plugs i found out i...

Time to clean up the hobby a bit, got a few pistons I will never use. Please check them out. Located in Canada. http://www.kijiji.ca/v-snowmobile-parts-trailer-accessories/regina/vintage-rotax-pistons/1185266238 Thanks for looking.

Post up some photos of any old sleds enjoying summer life! This is my Dad in the late 70's on his RV practicing for what we used to have, The Great River Run in Kamloops BC.

This is a 1975 MERC 340S/R. Its a 2 cylinder single carb with a Kohler motor. Its in good shape for the year but the seat is ripped and the lights on back of seat where rip is our broke. The engine pulls over but does not run. I haven't had time to clean the carb. I bought this as a project but...