Hi guys, I'm replacing the track on my '89 Safari Scout and the holes on the new track are not spaced the same as on the old one. There's 1/2 in difference so I need to move both drive sprockets inward 1/4 in.
Has anyone done this without a press? The shaft is the old hex type and heavily...
Item: Team tied clutch, Rev and XM Parts F/S
Location: Northwest Iowa
Got quite a few parts leftover from previous sleds. If you think I'm too high shoot me an offer on messenger or text 307-677-5230. All prices are plus shipping. Pictures of most everything...
The chain is stretched and the rear gear is worn on the kids '98 mini. I'm not looking for more speed for them and would like to fix it on the cheap. Where can I source the cheapest parts? I'm assuming I can just get a #40 chain and masterlink from tractor supply or something, but where can I...
Torn between dropping 1 tooth on the top sprocket or 2 teeth on my 05 500ss. Checked the 06 race manual and they claim 20 - 43 gearing (2 tooth drop on the top) will be fine with my stock 74 link chain.. but I imagine it'll have a nice bow in it hah..
I'm not one for top end. Just like...
Can anyone send me the dimension of the drive Axle on my 1972 TNT
This TNT is a 440 with a 15" in track
The bearing part number is 405-4002
I need inside diameter, outside diameter, any other special parts
Hey everybody, I've got a good deal on a new track and skid for my '99 summit 670 but will have to change the sprockets since the pitch is different.
The summit has 9 tooth sprockets with 2.52" pitch and 1.25" shaft diameter. The new track is off an '08 yamaha nytro, with 2" lugs and 3". If I...