Ski-Doo Snowmobiles Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. MXZ / Legend / Summit / Grand Touring / Formula
    Hello, I'm replacing the torsion springs in my 2000 grand touring 600. I have my skid out and spring loose. But I'm not sure how to get the idler wheel off to get the spring out. I can take the set screw out of the silver retaining ring, but how do I get the retaining ring off? From looking...
  2. Trailer Talk
    Was replacing electric brakes on the trailer and found a broken leaf spring. I have owned a couple dozen trailers and have never found one. Simple inexpensive fix, but thought it would be a good reminder to check before the season is here. For those without a calendar, that's about 10 days...
  3. Sledding - General Discussion
    I have a machinist friend that has a couple feet of 2" outside diameter delrim (spelling) left over. He is letting me use his workshop and lathe to make some spacers and collars. Wondering if anyone has the inside and outside diameter that should be used for 270/271 springs. I looked through...
  4. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Hey, Just picked up a 2012 bcx 600 etec and I am having issues with the clutch. It will engage about 3200 and start pulling. The rpms increase from 3200 to almost 5000 and it doesnt go any faster. Stays about 20 km/h. I watched the clutching and after it engages the primary stays where its at...
  5. Sledding - General Discussion
    Hi Folks ---- I was hearing a rattling sound while riding yesterday. It was coming from the right side of my sled. Stopped and checked the can side. I noticed that one of the springs that secure the canister fell. I think I know where it belongs, but wanted to get some feedback. (I believe it's...
  6. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Look familiar? I am about to get the wrenches out. Toasted roller? Bad spring? what would you wager?
  7. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    Would like to know the spring rate of the Dave Dunn clutch kit for a shorty etec. Thanks!
  8. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    First, love this machine, pretty sure it would spank my 2014 800 etec from last year. BRP has done a great job with the mapping. First time I've run a 1.5" track and when set up like my last 3 XP and XS gades, found it a bit pushy, so tonight I went to soften the center spring and this is what...
  9. MXZX Race Sleds
    what are the results of changing secondary clutch spring settings? also what indicates that your having secondary clutch problems?? thanks!
  10. MXZ / Legend / Summit / Grand Touring / Formula
    Hi, i have an 03 Legend 600. I purchased the sled last year in mint condition, only thing i didnt like was the clutching. i want my sled to be snappy and the stock spring was making the sled have a mild bog when engaging full throttle, so i put a stiffer spring in and it was very snappy, engaged...
  11. Vendor Deals
    Spring specials running until 4/30/14! Get these parts at great prices while you still can! Thanks for looking!
  12. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    I have a Dunn Kit in my 08 800r and want to replace the primary spring he sent me, I went to his site and found no info on it and no number to call. Anyone know which spring it is? His kit is great but everything wears out
  13. Skandic / Expedition
    Starts here, three posts: http://www.dootalk.com/forums/topic/649185-tundra-front-spring-upgrade/page-2#entry6210114
  14. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    Alright, I know this topic has covered numerous times but I searched and could not come up with an answer to my specific question. So I have a 08 500ss trail that had 7500 miles on the clutches so I thought it was time to freshen them up. While I had them apart and I had to replace the springs...
  15. Freestyle / Legend / Tundra / Expedition Sport
    OK, so I'm completely rebuilding a 1998 Tundra 2 LT. Engine is now rebuilt and I've removed and cleaned up both pulleys. My question is pretty simple---which helix hole should I put the spring in on the secondary. When it was dissassembled the spring was in hole position 1 (lightest load)...
  16. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Have an 09 600 etec renegade and my secondary clutch won't spring back all the way? See pic. Anybody have an idea why and what to do? It seems to spring back about half way, after that as hard has I dare try by hand to squeeze/pull it back it won't budge.?? Thanks for any help.
  17. Mach Z RT and MXZ 1000 SDI Models
    Removing the muffler sounds too easy to even bother with a Topic, but I have wrestled with the stubborn muffler spring behind the tuned pipe too long, that I though it was worth at least two pictures. A long reaching spring tool really helps. This one is 15 inches, and I bought the whole set...
  18. Sledding - General Discussion
    would this be the symptoms of a weak spring?. ski-doo was working perfect on clicker 5, with suit case on. But I put a can on and gain an extra 200 rpms and it was hitting 8300 rpms and the motor would drop rpms and go back up to 8100 and stay there. now with that said I put clickers down to 4...
  19. Sledding - General Discussion
    I am looking for some better shocks for a ZX (also may fit Rev and XP). Two 17" for front and a 13.25" for the front of skid (the center shock). I would like rebuildable and adjustable shocks that still have a strong charge. Not looking to spend a fortune though. My shocks are all beat out...
  20. Sledding - General Discussion
    hi all. are alot of people having secondary coil spring problems? here's my story about my long sled trip in northern ontario 1236 miles. i have a 13 gsx se 1200 4stroke, that gave me problems mid way thru. left me stuck in a slush pond a foot deep, went to cross it and the sled stop in the...
1-20 of 24 Results
Top