Ski-Doo Snowmobiles Forum banner
secondary clutch
1-15 of 15 Results
  1. 600 ACE 4-Stroke Models
    Hi everybody. I just moved up to Washington and wanted to get some sleds. I bought 2 2021 600 ace grand touring models. Only choice as I cannot order new sleds till Feb or March. My question is. When I see all the videos on how to set your chain they say it is set when the...
  2. REV Chassis - Performance and Trail Models
    Hello, I have a 2006 GSX and I needed to replace the jackshaft because the shaft was turning inside the bearing and is now all worn out. I took everything apart but my question is how many washers are behind the chaincase on the 3 studs? How do you align it? The parts diagram says 6 washers on...
  3. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    I have a 09 renegade 800r and the secondary clutch got stuck open after doing a couple high speed lake runs. After the runs I could feel the clutch slamming so when I took a look I saw the belt sitting about 1/2-5/8ths of a linch too low, and since the belt was so loose the primary was...
  4. REV-GEN 4 - Summit/Freeride/ 850 Turbo
    Just a word to the wise. Be careful when installing the bearing into the tower on the G4 secondary jackshaft. It's a much tighter fit than the XP/XM. I was installing Joey's (Dynamo Joe's) awesome clutch kit in the G4. Although the P Drive was new to me, the QRS secondary is not. I finished...
  5. Sled Parts For Sale or Trade
    Item: 2008 QRS Clutch & Jackshaft MXZ TNT Category: Sled Year: 2008 Location: Hamilton NY Price: $150 Secondary QRS clutch off of a 2008 MXZ TNT w/ new rollers, roller studs and E clips. Clutch is in excellent shape w/ approximately 700 miles on it. I replaced w/ a Team secondary early on and...
  6. REV Chassis - Mountain Sleds
    I was looking at my secondary clutch and noticed that there was about 3/16" play in and out on the shaft. i took it apart and I have 3 spacers on the shaft behind the clutch assembly. after further investigation I found this picture in a shop manual I noticed that I did not have that bowl...
  7. REV-XR/XS Chassis: 4-TEC 1200 Perf. & Trail Models
    Anyone have the bolts that hold the rollers on a 09 1200 come out? if so has anyone tried to drill and put spring pins in to keep from coming out again. We had them come out and destroy a new PB80 and the secondary faces I think we can put them in a machine and reface the clutches but want to...
  8. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    I was working on my dad's 09 XP and trying to get the belt off and the adjuster to un-tension the belt is very stiff. It has an aftermarket billet adjuster that came on the sled when he bought it. I removed the belt last year to clean the carbs without issue, but this year it will not come off...
  9. REV Chassis - Performance and Trail Models
    hey guys my head feels like its gonna explode I'm trying too use a 2006 800 summit secondary clutch for a 2007 renegade 800X i know i need a roller style for my renegade and thats all i know can i use the summit do they match ? any help would be greatly appreciated
  10. REV Chassis - Mountain Sleds
    hey guys my head feels like its gonna explode I'm trying too use a 2006 800 summit secondary clutch for a 2007 renegade 800X i know i need a roller style for my renegade and thats all i know , can i use the summit do they match ? any help would be greatly appreciated
  11. REV Chassis - Performance and Trail Models
    I just put on a cv tech power block 80 For my primary I'm trying too find a oem stock secondary but don't know what years would work for me Cv tech says stock secondary so I'm trying too keep it stock any help would be greatly appreciated Going on a '07 renegade 800X H.O. Thanx Adam
  12. Vintage Classifieds
    Hello All: I have for sale various Vintage Bombardier Ski-doo parts, including a 299 Single cyl Rotax engine complete with Clutch and Muffler. No Carb or starter recoil. A 247 Elan Head, Cylinder and Crank. Crank,Cylinder and Head are in excellent condition. I have Front Light Assys...
  13. REV Chassis - Performance and Trail Models
    hey guys trying to finish up the 440/800 swap i did on my rev and im now using a roller secondary clutch and would like to get a floating kit(from somewhere) I was at royal distributing in guelph yesterday and they gave 'the proper bushing for a rev' to float the clutch and im pretty convinced...
  14. Sled Parts For Sale or Trade
    Cleaning out my shed, I have a lightly used team tss-04 secondary clutch that fits 03-07 rev 800's, may fit 600 also not sure. Comes with new spring, and two helixes, one for good hook up and go the other is more of a snocross helix, and the alignment tool from team, not the same as a skidoo...
  15. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    I have a 2008 Renegade with the 600 HO SDI engine. Last year I tried to remove the secondary clutch and the bearing would not budge. So this year I will try it again. Any advise on how to free a stuck secondary? Tried pounding on the shaft when I had the chain case cover removed and that did...
1-15 of 15 Results
Top