Ski-Doo Snowmobiles Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. MXZX Race Sleds
    I am looking for a rear shock rocker that is connected to the bottom of the front arm of the rear suspension for an 03 MxzX, obviously Ski-Doo does not make them or have them in stock and I can't seem to find an aftermarket anywhere, part number is 503190187 . Any help is greatly appreciated...
  2. Vintage Ski Doo's
    Just wanted to see if anyone had any additional information regarding the best rear suspension settings for stock class drag and oval racing. I have a 1979 Blizzard 9500. I was planning on setting up the limiter strap at the second shortest setting (as specified by the shop manual). I was...
  3. MXZ / Legend / Summit / Grand Touring / Formula
    I'm putting together my off-season project and it's shaping up nicely. I did a bunch of reading on past articles and other related stuff. I couldn't find any relevant YouTube videos on this topic besides primarily the PowerModz project (wish I had that kind of budget and experience). I want...
  4. MXZ / Legend / Summit / Grand Touring / Formula
    I have a sag on rear suspension and I wanted to get my shocks rebuilt, but turns out they aren't rebuild able. The only option I have is to replace, but most exact replacements have the same problem and aren't rebuild able. The skid is SC-10 sport (stock) and I know that some of the other sleds...
  5. 900 ACE 4-Stroke Models
    Hey guys, I live in Northern Canada where the snow is hard as ice for a good 75% of the season and very rough. I usually ride a 2013 800 renegade, but I'm noticing now that the 154 seems to drive a lot smoother and also doesn't overheat as easily here. We hunt regularly on our sleds and pull...
  6. REV-GEN 4 & 5- Summit/Freeride/ 850 Turbo
    Just curious to see if anyone is running Zbroz' kit ( w/ EXIT shocks?
  7. Skandic / Expedition
    Anybody know where I might find a rear suspension arm for a 2004 ski doo expedition V-1000?
  8. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Just bought a 2016 gade sport carb model and was looking at getting after market suspension all around. Look around online and cant really find a good set to replace the rear shocks with. for the front I was looking at fox float 3 evols. Anybody have any suggestions I do a lot of lake and trail...
  9. MXZ / Legend / Summit / Grand Touring / Formula
    Hey guys, I am rebuilding my rear suspension in my 99 mxz 600 (sc10-2) suspension and I am having troubles with the rear cross shaft (item 13 in the image below). I have completely disassembled, cleaned, painted, and reasssembled everything else, but this rear cross shaft is seized as solid as...
  10. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Does anyone know of a company making torsion spring spacers for the SC5 suspension? I contacted HyGear and they do not currently offer torsion spring spacers for SC5 suspension. The factory spacers are pretty wimpy and mine are completely worn out. Thanks!
  11. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    I have a 2008 Renegade and one of my coupling blocks is cracked. I'm wanting to remove it and put my new one on but I'm not quite sure how to do it. I put a breaker bar and 10mm allen socket on it and the fastener broke loose a bit but now it is ratcheting when I use the breaker bar on it. I...
  12. Freestyle / Legend / Tundra / Expedition Sport
    I am wondering which rear suspension is better and why? The full torque reaction slide suspension of the First Gen Tundra LT or the tension spring rear link arm type of the Tundra II? What do you think? Pros and Cons of each or is there a outright winner here?
  13. MXZX Race Sleds
    Anyone have a pivot bracket for an 04 mxzx rear suspension, pivots on the front torque arm that bolt to the rear shock, Doo part # 503190766 or know of an aftermarket piece that may be a little stronger. Mine kinda broke...
  14. Mach Z RT and MXZ 1000 SDI Models
    Other than needing to extend the tunnel, will an SC4 136" skid bolt right up on my 2006 MACH Z-X (stock 121") tunnel with out having to make modifications to the bolt hole locations? Also, any coolant issues to consider regarding the heat exchangers with the longer track? Oh, and the skid I'm...
  15. REV-XP / XM Chassis - Mountain Sleds
    I have a 2009 Summit Everest 146 800r anyhow I was ditch banging hit a stump square on the rear skid. I was thinking of putting a Tmotion suspension under it with some stiffer shocks possibly Fox as I am a bigger guy and enjoy jumping/beating the ever living crap out of it. I should get around...
  16. Mach Z RT and MXZ 1000 SDI Models
    Hey Guys, the rear suspension on my 2006 Mach Z adr bottomed out like crazy last season. I am starting to get ready for this season and was wondering if a 2006 mach z x rear skid \ suspension will fit my 2006 mach z adr. I have heard they are much better. Thanks Paul B
  17. REV Chassis - Performance and Trail Models
    HI i have a question, the rear suspension is sagging on my 07 GTX MXZ. i don't believe the shocks are rebuildable? also should the torsion springs be replaced? where's the best place to buy new shocks. Thanks
  18. mileage

    This sled wasn't used for nearly 20 years, and was stored covered, but outside, and the track was on the ground. It had a busted slider, a seized hydraulic shock, and bearings with next to no grease in them. I got the suspension out, repacked all the bearings with new grease, put in a shock and slid
  19. REV Chassis - Mountain Sleds
    My 2007 800 151 Adrenaline only has a single front limiter strap on the rear suspension. I don't think it is missing because the spacer on the bottom does not allow for it... My 2006 Summit 800 151 Adrenaline has two straps like every other rev I've ever seen...
  20. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    I'm rebuilding the rear suspension on my '08 renegade and noticed that the rear suspension front arm bushings and axles are completely wiped out. Doo parts are kind of pricey for what they are (surprise!) and I was wondering if anyone made aftermarket bushings and axles that are an upgrade to...
1-20 of 21 Results