Ski-Doo Snowmobiles Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 16 Results
  1. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    So I’ve got a 2008 XP with a motor that is not salvageable. I was wondering if I could buy a ZX/REV 593 block (600) (NON HO) motor and buy a bottom crankcase half for a 2008+ and put it in place of the one that’s on there to make it work with the motor mounts? Or would that not work? Thanks for...
  2. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    So I’ve got a 2008 XP with a motor that is not salvageable. I was wondering if I could buy a ZX/REV 593 block (600) (NON HO) motor and buy a bottom crankcase half for a 2008+ and put it in place of the one that’s on there to make it work with the motor mounts? Or would that not work? Thanks for...
  3. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    I’ve got a 2008 XP 800R that the motor has been grenaded. The connecting rod, upper case half, top end, cylinder skirt, is all broken. So basically nothing is salvageable. I don’t have a huge budget (as I’m only 15) but good thing it is the off season just in case I gotta get some more cash...
  4. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    I’ve got a 2008 Summit XP 800R that the motor has been grenaded. The connecting rod, upper case half, top end, cylinder skirt, is all broken. So basically nothing is salvageable. I don’t have a huge budget (as I’m only 15) but good thing it is the off season just in case I gotta get some more...
  5. Engine FAQs
    My sons 2005 600 sdi motor has blown the bottom end and it seems to be almost impossible to buy replacement parts. I can buy a 2011 600 etec with flywheel for a decent price. I am wondering if it will fit in and line up in the 2005 chassis? and what will I eed to buy additionall to make it work...
  6. REV Chassis - Performance and Trail Models
    I have a 2005 GSX 600ho SDI that needs a top end. I also have a 2001 MXZ 600. How hard would it be to put the 600 from the MXZ into the GSX? Has anyone done this type swap before? I would basically have a GSX 500ss in the end. Will the motor bolt up? Any big issues I might run into? I was going...
  7. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    I was wondering if you can fit a 800 etec in a 2012 backcountry 600 xp frame?
  8. MXZX Race Sleds
    I have a 2000 Skidoo MXZX 440 Liquid Cooled Sled. It has a Blown Up Motor, Pistons Scored badly. Since it's not a common sled parts have been a nightmare.. Even the HEADLIGHT SWITCH is discontinued. Looking to buy a new motor for it. Could I just Bolt in a 440 That isn't a LC? Are There...
  9. MXZ / Legend / Summit / Grand Touring / Formula
    I just picked up a 2000 mxz 600 with a brand new engine but the rest of the sled is not put together, so Im thinkin about seein if the engine is the same as my 500ss seein as they are both 597s. I wasnt sure if there was any difference in the blocks.... anyone know???? I have the whole sled...
  10. MXZX Race Sleds
    Hey guys, new to the forum! Ive got a 2005 mxzx 440 and i just picked up a complete motor out of a 2008 600rs. Ive got the whole setup, motor, exhaust, ecm, wiring harness, carbs, airbox, even the spark plugs! Id really like to know how to go about doing this swap, i know i need to run a 600ho...
  11. MXZ / Legend / Summit / Grand Touring / Formula
    hello I want to swap out 96 583 to 98 583 both sleds mxz is it possible looks like one electrical plug is dif
  12. Sledding - General Discussion
    OK guys so being 16 and riding revs for so many years(my uncles) I decided its time to get my own got rid of my old formula 500 and got a rev. Well currently shes a 440 and id like to do a motor swap and would like some advice from some fellow dooers! so I have found a 04 skidoo rev 600 ho motor...
  13. REV Chassis - Performance and Trail Models
    This year I finally killed my bullet proof Blair Morgan 800. I was going to rebuild the motor ASAP but I found a decent deal on an 03 800HO. My thoughts are to swap the motors get through the rest of the season , rebuild my 800 this spring and put it on the shelf as a back up. I fell pretty...
  14. Mach Z / Mach 1 / Formula III Triples
    Ive got a 97 Formula SL 500 that runs like a raped ape but the tunnel is bent and the suspension front and rear is Shot. I found a 98 Formula 3 700 complete sled minus the motor for cheap and I was wondering if the 500 fan cooled motor will go into the 98 Formula 3 without too much fuss. Will it...
  15. MXZ / Legend / Summit / Grand Touring / Formula
    I just bought a 1999 chassis with a blown engine and I was just wondering what they all change from 99 to 01 in the mxz 500's. I was hoping to drop the crank case, cylinders, head, and clutch from a 01 mxz 500 into it. are the motor mounts the same? any information is appreciated... thanks
  16. Freestyle / Legend / Tundra / Expedition Sport
    Hi I have a Tundra 300F -07 and I need some more power. I have heard other people have changed to 600 or 800 2-stroke motors, but have not found any build treads on this topic. I have not yet bought any motor or other parts, but would appriciate if you have any links to other build threads...
1-16 of 16 Results
Top