Ski-Doo Snowmobiles Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 64 Results
  1. REV-GEN 4 & 5 four stroke
    Hey, we were sledding in west Yellowstone this week. Both my dads and my sled (‘23 xrs 900r, ‘22 Mach z) both with smart shox, were constantly bottoming out at higher altitude. Like completely no suspension riding on the bump stops bottoming out continuously. They fixed themselves after we went...
  2. REV-GEN 4 & 5 four stroke
    Good evening, I took off riding yesterday with roughly 2,000km on my 2022 Mach Z 900r. About 2 minutes into the ride I received a suspension fault message. I was then unable to adjust the smart shox. The suspension then seemed the stiffest setting, so it was a bit of a workout for 600km of...
  3. Suspension FAQs
    Good evening, I took off riding yesterday with roughly 2,000km on my 2022 Mach Z 900r. About 2 minutes into the ride I received a suspension fault message. I was then unable to adjust the smart shox. The suspension then seemed the stiffest setting, so it was a bit of a workout for 600km of...
  4. General Sledding Discussions
    I am looking for a reliable, powerful sled and can buy the above for 800 Canadian. Here's what the owner said about it, It has the new style front skis from a 2000+ Skidoo with carbide grips for ice. The pull start was replaced last year. Previous owner rebuilt the motor in 2019 with new...
  5. REV Chassis - Performance and Trail Models
    I have an 05 MXZ 600 sdi that needs a magneto flywheel. From what I read a flywheel from any year or model sdi will work in this 05? I’m communicating with a fellow that may have one from an 06 Mach z 1000. Can someone verify that this flywheel will bolt in with no modifications? I’m going to be...
  6. Mach Z / Mach 1 / Formula III Triples
    I not sure if I got this in a right place.i put a can on my z and I just wanna make sure everything is right cause I just bought it.my jets are 290 and my air screw was at around 3 turns.i heard there supose to be around 4.5.and was also wondering is my gt800 triple should be at the same...
  7. Mach Z / Mach 1 / Formula III Triples
    Hey guys, I have a 2000 mach z that I just finished rebuilding after sitting for many years. I changed my track during the rebuild but I also noticed that when I pushed down on my rear suspension it doesn't spring back up. What could be the issue? Shocks? Springs? And also are the original...
  8. REV-GEN 4 & 5 four stroke
    Mach Z owners, I got way late delivery already March 7th not here yet. Have not heard nothing good about Mach Z / but rides good. Not pulling RPM, Slow as heck, fighting to beat a 850. Thinking on Not getting it. Owned Many Mach Z’s and I have a Mach Z collection. (Not in it for status,) just...
  9. REV-GEN 4 & 5 four stroke
    Wondering if my speedometer reading and max speed logged is GPS driven or mechanical ?
  10. Mach Z / Mach 1 / Formula III Triples Classifieds
    Looking for Mach Z F-chassis (1993-1997) stingers / silencers. For instance: Crank Shop part number 1021410-3. Dyno Port part number S2042 / S2043. MBRP part number 1010012.
  11. Mach Z RT and MXZ 1000 SDI Models
    I’m going to get my old Mach Z running again. Any advise on how to keep running? Last time she only lasted 800 miles or so. It’s completely stock. I love my Renegade 850 etec, but there is something special about the old Beast!!
  12. Maine
    Dave ,Enjoy the New Ride .
  13. REV-GEN 4 & 5 four stroke
    Hello, I am going from an 850 to a Mach Z. I really like the LinQ Trail Seat Bag - 11 L (SKU860201275) from my 850. I do not beleive it will fit the wide body of the 900. Any replacement suggestions and what do most people with the 900 use for linq accessories?
  14. Mach Z / Mach 1 / Formula III Triples
    Hi there, I've my engine apart (809) due to a ring failure. I'm ready to reinstall the cylinders but I'm not sure about the right ring gap to aim for. Skidoo manual says between.008 to .024 which is not enough precise to me. I'm using stock oem Elko pistons with spi rings. Can you guys help with...
  15. MXZ / Legend / Summit / Grand Touring / Formula
    Having trouble finding the year this 670 Rotax is. Has a bar code ID on it and the recoil is on the outside, so it's 95+. I'm thinking this is out of a 96 MXZ 670, can anyone confirm? Just the engine, this rotax was swapped into another chassis. There is a D stamped on the head. The bar...
  16. Vintage Ski Doo's
    Hi all, I've just recently purchased what I believe to be a 1994 Mach 1 670 inside a 1994 Mach Z 780 chassis. What i'm confused by is the VIN number on the side. This number isn't matching up to any database I can find for 90s Skidoo sleds. The VIN on the sled is 3877 00338. This is the only...
  17. Vintage Ski Doo's
    Hi all, I've just recently purchased what I believe to be a 1994 Mach 1 670 inside a 1994 Mach Z 780 chassis. What i'm confused by is the VIN number on the side. This number isn't matching up to any database I can find for 90s Skidoo sleds. The VIN on the sled is 3877 00338. This is the only...
  18. Mach Z RT and MXZ 1000 SDI Models
    Can anyone please tell me how many chassis grounds there are on the '05 1000 SDI wire harness; and where they are located? My sled is completely dead and I don't know where else to start. I have a brand new battery. All of my fuses and relays are in good working condition. When I put the Dess...
  19. Vintage Classifieds
    Looking for OEM Yellow (front) Bumper trim for F-chassis Sleds 1993 MXZ or Have seen them on 1997 Mach Z & Mach 1 sleds... Will consider complete bumper w/the yellow trim. Thanks!! There is one on E-bay right now but it is very sun faded, you cant fix that....
1-20 of 64 Results
Top