Search Results for ‘hard start’

I bought the Summit X 670 last winter and only got a couple of chances to ride it. The first time it had water in the fuel from being left outside, but a little gas line antifreeze ran through it and it ran perfectly; had full power, started easily, and would idle on it's own. Now this year I've...

I've got an 03 Rev 600HO that I had removed the engine to replace the crank seals (one popped out) Well anyway, I got it together and if I start it without the airbox on it runs and idles great but once I put the air box on it will start hard and when it does its like running on one cylinder and...

I have a 2001 Summit 700 bored to 734 with Rk-tek heads and big bore kit. V-Forece 3 reeds. I am having issues getting it started, hot or cold. The sled runs great as long as i dont turn it off. Once i turn it off it doesnt want to start. It seems to want to start every 4th pull but quickly...

I used to think it was normal for my sled to numerous pulls to start until i went riding with my friend who has almost the exact same sled, his started fine in a lot less pulls than mine. Ive also noticed that when i first take off, it has to get really high in rpms and smokes a lot before it...

I just installed a fresh BJ rebuilt 800R motor on a new to me 07 summit Adrenaline. After talking with BJ I decided to remove the electric starter, ring gear, battery, and wiring to save weight. I started engine for the first time tonight. I push the RER button and there is no Reverse, it...