Ski-Doo Snowmobiles Forum banner
fuel pump
1-20 of 35 Results
  1. REV-XP / XM Chassis - Mountain Sleds
    So I thought I'd post something helpful. It's been a while since I searched this so someone might have beaten me too it. Seems to me that every time I go looking for the part number an automotive pump that works for our sleds it ends up being a goose chase, and I end up scrolling through old...
  2. Sledding - General Discussion
    So I thought I'd post something helpful. It's been a while since I searched this so someone might have beaten me too it. Seems to me that every time I go looking for the part number an automotive pump that works for our sleds it ends up being a goose chase, and I end up scrolling through old...
  3. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    My sled needs a new fuel pump. Shop wants $510 for the pump and $860 total for labor and pump is this avg?
  4. REV Chassis - Performance and Trail Models
    Hey everyone, I'm doing an engine rebuild on my 05 800HO that I spring checked on 2004. I ordered a couple fuel pump rebuild kits but neither of them were exactly what I needed, they were close but like I said not exact. I'm just going put an after Mikuni on it and call it a day. My challenge...
  5. REV-GEN 4: 850 MXZ Perf. Trail 129/ Renegade 137
    Well, new 2020 with no miles, bit of white stuff and thought Id break in the sled. 850 XRS, filled with fuel and realized a bad leak was at the O-ring that seals in the fuel pump (FUEL HAS NEVER BEEN HIGH ENOUGTH TO SEE THIS UNTIL NOW) , I don't think it was ever in correct. I have tried too...
  6. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    Hi All, I've got a 2011 Ski Doo MXZ TNT 600 Carb. While out on the trail my helmet cord wrapped around the choke and left it on half choke. I rode for about 15-20 kms until I realized it was on. I turned the choke off and it ran for about 5-10 kms fine. All the sudden I lost all power and the...
  7. Vintage Ski Doo's
    Hi All, As my son drove by yesterday on our 1986 250, I thought to myself how bulletproof the sled has been. 2 minutes later it stopped running, ha. Hoping for your help diagnosing. The sled died out (it's not getting fuel) while he was riding it. The primer won't move any fuel, even if I...
  8. REV Chassis - Mountain Sleds
    Curious, I have 2004 800ho that I've been trying to fix for a while. I've narrowed it down to a possible plugged fuel pump or bad pulse line. I found a repair kit on Dennis Kirk Winderosa Fuel Pump Repair Kit - 451471 Part # 187411 is this rebuildable?? can I take it apart an clean it?? I've...
  9. Freestyle / Legend / Tundra / Expedition Sport
    Good afternoon. I just installed a new fuel pump in my 2015 Tundra Extreme 600 Etec. After hooking all gas lines back up and the electrical plug, I hit the start button and I have nothing. I can't hear the fuel pump click on or anything. Kinda stumped. Any insight would be very appreciated...
  10. Mach Z RT and MXZ 1000 SDI Models
    Long story short, last season my 2005 Mach Z 1000 sdi ran great. My last run was late March (I live in MN). I just put a new skid in and went to fire her up so I could get my track aligned and to my surprise she wouldn’t start. Battery was still fully charged, plugs spark great, and the pump...
  11. REV Chassis - Performance and Trail Models
    Will I get into trouble if I have remove the low pressure fuel pump out of the loop and just bypass it altogether? I am just using my high pressure pump to feed my injection system. The low pressure pump is defective and I am too lazy to get to it to repair it. The low pressure pump doesn't...
  12. Ontario
    Advice needed. I removed the container the high pressure pump sits in within the fuel tank. I removed it because the sled sat for several years and the pick up tube broke apart and some small pieces may have entered the low pressure fuel line, pump and or low pressure pump supply line. I really...
  13. MXZ / Legend / Summit / Grand Touring / Formula
    I don't think I have an issue with my fuel pump on my 97 F500, but I was wondering where I could get a rebuild kit or if I should just buy a new one. Now the starting issue, recently when I am starting the sled cold it has trouble, I have to prime it, pull it over several times and repeat that...
  14. Mach Z / Mach 1 / Formula III Triples
    I have been having fuel delivery issues lately with my 98 FIII 700 triple, I thought I fixed it but it turns out my sled was either gravity feeding or the fuel pump works intermittently. When I removed the fuel pump to check it out the pulse line leaked out about a tsp of oil and the...
  15. MXZ / Legend / Summit / Grand Touring / Formula
    The fuel pump 403901800 is not being made any more I got a replacement. MIKUNI df52-136 and nothing is right the fuel lines are to small so will a 2002 mxz 700 fuel pump 403901806 work?thanks
  16. MXZ / Legend / Summit / Grand Touring / Formula
    Sorry double posted
  17. MXZ / Legend / Summit / Grand Touring / Formula
    Hi guys. I just rebuilt a 2002 grand touring 500 fan engine which I received disassembled from a pal, and it's back in the machine and everything hooked up except the two hoses originating beneath the choke pots on top of each carb, and the Impulse hose. The hoses on the carbs are fairly long...
  18. Skandic / Expedition
    Hi All, I'm not a snowmobile regular user but work with them at the minesite I work at, and this morning the 2008 Skandic 550 was leaking a lot of fuel and when investigating we observed the jet of fuel (see attached pic) out of what I think is the fuel pump. I thought it was a pinhole leak...
  19. REV Chassis - Performance and Trail Models
    I finally got my 98 formula 3 700 running but it is not running well. At idle the rpm's will pulse between 1000 and 3000 rpm in a fairly consistent pattern. Also when I run the sled there is little to no bottom end(barely spin the track) when it does finally get up to speed it pulls pretty good...
  20. REV-XP / XM Chassis - Mountain Sleds
    I'm wondering if anyone has tested a fuel pump (fuel system leak test from manual) on an Etec without BUDDS. Procedure says to Tee in pressure gauge and with BUDDS connected you can activate the fuel pump with the click of a mouse. I'm thinking that I will Tee in a pressure gauge and just...
1-20 of 35 Results
Top