Was out riding this past weekend when my '13 Backcountry 800 which had a CV tech short block installed about 14 months ago, lost power instantaneously and threw a knock code. I've been down this road before so I pulled the spark plug to find it bent out of shape severely. We towed it home and...

I am looking for a 670 HO single exhaust pipe. It is going on a 1998 Summit X 670 with the HO motor. These pipes are getting hard to find however the snowmobile that I bought and bringing back to life has the standard 670 pipe. I am hoping someone on the forum has one tucked away that they...

Need some feedback please- Just bought this used a year ago. I had to replace the belly pan and front supports due to a tree coming down in the spring and clipping the nose. When I went to put it back together I noticed the exhaust is hitting on the middle front support that goes out to the...

I'm replacing the exhaust system on my 2005 MX Z 500 SS and I discovered that the exhaust manifold insulating wool (p/n 514053284) is no longer available. I'm looking for some advice on how to overcome this problem. Any suggestions? Is insulating wool sold in sheets that could be cut to fit...

Currently trying to find a primary exhaust for my sled but have been having a hard time. All the parts people I've reached out to have nothing and the ones I've seen on ebay or kijiji just seem to be asking an arm and a leg. Is there somewhere that makes these for a decent price? Or better yet...

I have been looking to get a performance exhaust for my 2002 mxz 380, but haven't found any that are specifically for a 380. I am wondering if an exhaust for a 2002 mxz 500 would fit on my 380 without any problems.

In an attempt to lighten up the sled and give it a little bit of noise to be able to hear what the sled is doing instead of just hearing wind noise and ski noise I purchased an MBRP race exhaust. I measured a 15lb savings and I figured the sled was so quiet that the 12db gain wouldn't be too...

Hey Guys, I have a 2014 1200 Gsx 13000km stock We were out tonight and stopped on the trail... Saw an orange glow under the muffler in the snow... after further inspection the muffler was glowing ORANGE under the panels ( not enough to melt the outer shield that I could see yet) Any ideas if...

Hello my name is Connor I am looking for any cool parts or upgrades for a 2017 600 e tec rev xs. Interested in: Aftermarket set of on/off trail skis in good condition Slp pipe and y pipe Trail can 43/47 helix or other clutching items Small windshield Outside windshield deflectors Linq gas caddy...

Is the H.O. pipe any better than the other 670 pipe from a mxz or formula z? Side by side there dont seem to be much difference except where the exhaust exits is a little different angle.My buddy kinda took my H.O. pipe that came off my H.O. and stuck it on his 670. Just wondering If there is...

Item: Parting out 800x Category: Sled Year: N/A Location: Mehoopany Pa Price: $10 and up Parting out an 04 800ho mxzx. KEEPING CHASSIS AND PLASTICS Seat - $50 Rear skid - $150 121 ripsaw - $150 Full exhaust system - $100 Gas tank - $50. (Have 2) Handlebar controls - $70 7" riser - $35 Wiring...

Item: 800 engine parts Category: Sled Year: N/A Location: Mehoopany Pa. Price: $25 and up All removed from 04 800ho Rack carbs - $75 Cylinder with piston - $100 Rage cage with reeds - $50 Exhaust valves - $40 Cylinder head - $75 Oil pump - $25 Water pump - $25 Stator flywheel and pickups -...

Does anyone make an aftermarket can for this sled?

Paperboy came down last night and in 30 minutes he had the thing all torn apart as I passed him wrenches and helped take off one or two bolts. I bought the full kit from Chris and was surprised when Paperboy seemed to know what everything was for as we looked it all over. Taking the sled apart...

Item: KYB pro 40's and slp exhaust Category: Sled Year: NA Location: Chaumont, NY Price: 800 Selling set of kyb pro 40's with dual rate springs and coated shafts, built and valved by monster performance, 18" ctc, slp exhaust, ypipe, pipe, can for 2012-2016 800 etec. $800 for shocks, $350 for...

Seeing if anyone has been following the release of new mountain exhaust pipes and cans for the 850. The GGB Mountain can was released last season and was too loud in my opinion. Interested in SLP and/or Straight Line Performance full exhausts. Or just anything that it reasonably priced and...

I am thinking of upgrading the exhaust on my sled, getting a better can. the problem is that on my S Chassis my pipe and can are one piece. So if I wanted to get a new can I would have to get a new pipe that would fit my sled, as well as a can. I did some research and found someone with the same...

has anyone used a bosch exhaust temp sensor from acdelco.com. Part number 213-4778. i see in the rev-xp forum this is what guys are using since the DOO sensor is $240 and this one is around $60 and is supposed to be better quality and last longer. anyone try an alternative or can chime in? i...

would like to know if somebody found a way to make thoses exhaust valves open sooner in powerband ... to bring the last step (full;y open) down in rpm she d like some more flow around 6000-6500 rpm thanks to share ( i can trade again 800rs builts ;)

I'm looking for a new exhaust boot. Does any one have a part number, or know which ones will fit it? Thanks, Matt