I wanted to get input on what folks use to clean the brake dust off the cover and to clean the tunnel in general without removing the paint. Thanks in advance for any advice on products that work well, and don't present a hazard to the finish.

Hi Guys, New to the site and Ski-Doo. I'm sure its already on here somewhere but I'm having problems searching for things. Can anyone point me in the right direction ? Tell me how to search these forums ? Thanks, 2002 Legend 700

So my 16 FR has accumulated soot on the RH side green panel near the exhaust and also on the belly pan. Is there some magical solvent that will get this off easily without damaging the plastic?? Regular soap and water is not working. I tried some lacquer thinner which seemed to worked but I'm...

So my first ride out with my new orange mcode pants this past season and I took a spill off the sled and the machines track rubbed up against my thigh. Now I have a black rubber mark on the bright orange pants and im unsure of how to remove it. I love the pants and I want to make them last. Any...

Hi As many other people on here have written about, I too have just cleaned my RAVE valves ('97 583), for the first time and now notice them clicking/ticking while at idle as well as the standard engine exhaust noise seems to be at a different pitch at around 6000 rmp. I have read pretty much...

Hey guys so I decided to pull my raves and discovered that they are very very dirty. I cleaned most of it off with a copper wire brush and carb cleaner but I was just wondering how you guys clean the inside of the motor where the raves go? I didn't want to go scrubbing in there because i didn't...

What's the best way to clean the throttlebody on an sdi ?

I recently have cleaned my rave valves but when I cleaned them I polished them to a mirror finish will this improve on anything

hello, I have recently cleaned my rave valves on my mxz 670 and when I was cleaning them I polished them to a mirror finish all around does this help any?

What is everyone using to clean the black off the yellow exhaust port on new 2013 renagade X's?

This is a field expediant method at solving many carb problems. The sled I did today was a 98' 440 fan cool but if your sled has choke and is a normal looking mikuni carb pair chances are the following method could fix your problems (especially if problem developed after not running machine all...

So i bought a mach z motor that was in a fire.. Motor is in great shape besides the fact its completely black, like everywhere. Gas and carb cleaner just aren't cutting it. But i have heard of people using soda in soda blasters? Just wondering if soda abrasive would work in a normal portable pod...