Ski-Doo Snowmobiles Forum banner
chaincase
1-20 of 41 Results
  1. Sled Parts For Sale or Trade
    Item: Ski-doo 25T Chain Sprocket Category: Sled Year: 2002 Location: Michigan Price: $20 Used 25 tooth chain sprocket/gear. Came out of a 2002 MXZ 700 PM me for any additional details, etc. Thanks
  2. MXZ / Legend / Summit / Grand Touring / Formula
    Changing my chaincase oil in my 1997 S-series chasis with reverse. Watched the youtube video first to see what to watch for with the reverse option on my sled. My cover did not come off like the video. The gears came out with the cover and I did not see where the "forks" where when the cover...
  3. REV-XR/XS Chassis: 4-TEC 1200 Perf. & Trail Models
    My 2013 GSX SE, electronic reverse, has 9,000 kms. on it. I’m now having reverse problems. I have indexed the reverse gear, measured in chaincase oil in, adjusted the chain and belt to factory. My reverse now engages each time but slips out of reverse and grinds once in motion. I’m thinking that...
  4. REV Chassis - Performance and Trail Models
    Hello, I have a 2006 GSX and I needed to replace the jackshaft because the shaft was turning inside the bearing and is now all worn out. I took everything apart but my question is how many washers are behind the chaincase on the 3 studs? How do you align it? The parts diagram says 6 washers on...
  5. 900 ACE 4-Stroke Models
    Hi, I have been searching for a video or procedure for changing the chaincase oil in my 2017, 900 Grand Touring LE that has the electric reverse solenoid. It seems to require more work. If anyone can provide me with some information, that would be great. I have looked for blogs that would help...
  6. Race Sled Classifieds
    slipper Gear in great working condition, removed from sled when I swapped the engine for a 800 E-Tec..inbox or text 1-709-899-3064
  7. REV Chassis - Mountain Sleds
    Newbie here. I am trying to remove the track to repair the sled. I was doing really good until now. (See photos) I have everything off on the chaincase side including the criclip except ball bearing ring. I have everything off on the brake side (yes, I used the CT Brake Caliper Puller)...
  8. Sledding - General Discussion
    Hi all, I took apart my chaincase after a chain failure and while I know the chaincase halves need to be replaced (smashed to bits) I am unsure of the gears. I can add pictures, but am unsure if a camera will show the marks on the gears. I have mech reverse, so there is more stuff in the chain...
  9. Sledding - General Discussion
    What started as a great ride today took a dive early on with some kind of breakdown in the chain case of my 2016 expy sport (600 ace). I haven't opened it up yet, but have some good guesses. You could smell oil, so I'm thinking there is a rupture. Also you can turn the secondary and the track...
  10. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Hey Guys, doing a track swap on my renegade and going to do jackshaft and driveshaft bearings while im at it, ive heard lots of talk about the lower chaincase bearing being a pain to get out and everybody is saying to get the brp puller for it. I cannot find this tool anywhere online, does...
  11. MXZ / Legend / Summit / Grand Touring / Formula
    How strong is a chaincase and chain drives on the stock sleds? I am building a buggy and really wanted to use all of the sleds drivetrain for the build.If I use the chain case I could get reverse. But I don't wanna do a ton of work and find out it can't handle it. Motor is a 670. Chaincase is f...
  12. MXZ / Legend / Summit / Grand Touring / Formula
    I bought a 2001 MXZ off kijiji last year. I didn't find out until later he had done an engine swap on it. I found a whack of problems from the carb drain coming out and the clutch coming off as well as others very soon after it was in my possession. I think I got most of his mistakes figured...
  13. Sled Parts For Sale or Trade
    Item: Rev Parts Category: Sled Year: 2003-2007 Location: Michigan Price: Offers Accepted Chain case Complete, 22/43 gears (?) Unopened - $100 Brake Caliper and Master Cylinder & Lever- $50 Clutch Gaurd -SOLD Speedo - SOLD Dash - $20 Headlight - SOLD Air Box (Inner & Outer) - $40 Steering...
  14. REV-XP / XM Chassis - Mountain Sleds
    Hey guys, I was curious if any of you guru's knew what material the chaincase is made of. I ended up hitting a stump on Sunday, and a piece broke off of the lower section of my chaincase. I was thinking of maybe trying to pull it, clean it, and weld it up. Dealership claims its made of straight...
  15. MXZ / Legend / Summit / Grand Touring / Formula
    2003 MXZ 600 non REV, Can anyone tell me why the drive shaft bearing, which has a seal only on one side, has the seal facing inside the chain case? If the seal keeps chain case oil out of bearing, how does it get lubricated? is there just enough seepage that it doesnt run dry? Seems like the...
  16. REV-GEN 4 - Summit/Freeride/ 850 Turbo
    So I'm at 15% break-in remaining and it's been going smoothly with one exception: Track Vibration. It seems sporadic but definitely more pronounced in powder at low to medium track speed. Prolly 80% of the time its vibrating. I'm running with one other 850 and he doesn't have the same issue...
  17. MXZ / Legend / Summit / Grand Touring / Formula
    Took off stock track and put on Camo. Ice Ripper Now there is a noise I swear is coming from the chaincase. Had a buddy's shop look at it. Cannot find anything wrong. The "new" track is fully clipped. The noise is usually when slowing down. It was not there before the track change. I do...
  18. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    I hate to do this but I'm wondering how much chaincase oil to put in my 15 renegade xrs 800. Some people are saying 355ml, some 450ml, and some 500ml. I don't have a shop manual right now, just ordered on through my dealer, but can someone please enlighten me? Thanks
  19. Sledding - General Discussion
    Hi, last season my chaincase blew apart and im in the process of replacing it. I am wondering if there is a way to bolt the chaincase on to the sled rather than re riveting it back on. A part number or a method of which you guys may have done it would be greatly appreciated. (I found this part...
  20. REV-XP / XM Chassis - Mountain Sleds
    I brought a newbie snowmobiling and didn't explain the parking brake...unfortunately I am now having to replace the rotor and brake caliper. I bought the special tool needed to pull the caliper off the bearing. My question is, " do you have to release the chain case side to pull the caliper...
1-20 of 41 Results
Top