Ski-Doo Snowmobiles Forum banner
bolt
1-6 of 6 Results
  1. Vintage Ski Doo's
    Just picked up a sled tonight, drove her up into trailer, when got her home noticed the driven clutch bolt and retainer were missing. Guess one of his kids needed a bolt and took it off this running sled for his own... I searched the web for hours for the bolt, or an indication of what size bolt...
  2. MXZ / Legend / Summit / Grand Touring / Formula
    So, my exhaust gaskets were shot. I decided to pull the manifold and all but one bolt came out - it snapped off. In addition to the snapped off bolt, the y-pipe also had a crack. Y-pipe fix: - cleaned it up - screwed to a piece of 4x4 - welded - let cool over night still attached to the...
  3. REV Chassis - Mountain Sleds
    I am not sure what to do? Upon reassemble, the bolt that is circled in red, has broke off in the case. I can get it out, but would have to start all over splitting the case again, very big job! This bolt is only torqued to 8 lbs. it holds the bottom pan on for the antifreeze circulation. Two...
  4. Sledding - General Discussion
    Hey guys, I have a set of C&A Pro Outlaws on my 2008 RS Mod. Broke the outer plastic right below the spindle and need to remove the ski and replace. I cant get the bolt out of the ski and spindle, the bolt turns, the bushings do not turn with the bolt which leads me to believe its not seized...
  5. Freestyle / Legend / Tundra / Expedition Sport
    While I am waiting on the replacement control arms for my 06 Freestyle 300f I put the arms from a 550 Expedition Sport on the ski legs. If I add the bolt that tightens the arm, it hits the shock and restricts the range of steering. Would it be safe to run without this bolt since it is the...
  6. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Just installed a new Team secondary on my 2010 Renegade 600 etec. I took it into a local shop to have the clutch aligned since I didn't have the magic tool. They say I over torqued the retaining bolt (over 18 lbs) and the threads are damaged inside the jack shaft. They want to tear it apart and...
1-6 of 6 Results
Top