Item: 2003 MXZ 700 Ported Top End & RKT Head
Price: 550 OBO
2003 ski doo mxz 700 ported jugs and rktek head, stock head, rave valves....used elko pistons included but I'd just get a new set for safety's sake. Both of the jugs were trail ported and...
I just picked up a 96 grand touring with the 700. It is running very rich and fouls the plugs badly after just a few minutes of riding. Previous owner removed the dpm setup and installed a primer instead. Said he went thru the electrical testing ohms on the coils and stator and it all checked...
Item: MXZ 700 Olympic Edition
Location: Mattituck NY
2002 MXZ 700 Olympic edition. 2986 miles. I bought a package deal and this sled was included. It had sat for 3 years with bad gas. I replaced the tank grommet, fuel lines, fuel filter, reed cages, carb...
I have a problem that has me stumped. My brother's 2001 700 is bogging down at WOT. It idles great at about 3000 rpm and starts fine. Has about 150 psi compression on pto side and about 160 psi compression on mag side. I have taken the carbs apart several times and cleaned them...
Currently trying to find a primary exhaust for my sled but have been having a hard time. All the parts people I've reached out to have nothing and the ones I've seen on ebay or kijiji just seem to be asking an arm and a leg.
Is there somewhere that makes these for a decent price? Or better yet...
Hey guys got a 98 skidoo grand touring 700 triple dies randomly at times i can drive 30-40km sometimes only make 20-40ft and it stalls , doesnt bog down just turns off as if someone hit the kill switch , sometimes fires up right after or after waiting 5-10mins fires up again and same issue
hi everyone can someone help me find a set of handle bars for a 2000 grand touring 700 triple with everything working on them.Also i need an air box as well. can send cash check emt money order draft dosent matter. please help
So I'm trying to install a brp temp gauge onto my cluster, its a 2003 zx summit 700. I'm wondering what I need to do so it will read the temp? I have two separate connectors coming out of the head, one has a purple/brown wire and black wire with green end on it as seen in the picture, Nothing...
Item: 1998 formula 3 700
New crank with updated bearings. Studded track in good shape. Dynoport triple pipes and clutching. Fast 2700mi. Call or txt 570-205-3354
hi everybody, i bought a 1998 formula 3 700 triple not to long ago. runs good, but the temperature guage doesnt work. it came stock with the 4 guages, temp, tach, spedometer, and fuel guages. did a continuity test, theres power to and from the guages, the guage lights up, but with driving the...
I was riding my 2000 Ski Doo Summit 700 and it stalled on me. When I went to start it, the pull cord was very hard to pull. I checked the compression in both cylinders and they were good. I eventually figured out the sled was stuck in gear. I had a buddy hold the back end up so the track was not...
Considering buying a 1997 Grand Touring SE 700 for $800 (CAD), everything looks to be in decent shape except for two things:
1) Small amount of oil leaking from 2 of 3 cylinders in the area shown in the photo below. If oil can leak there, then I guess that means it has an exhaust leak too...
Item: SHR ported 700 cylinders and head
Selling for a buddy. 700 cylinders ported by Big John at SHR. Cut head that hasn't been run yet. 1 cylinder has new playing and the other is almost new. Comes with base gaskets. Set up for pump gas. Was...
Hey, this is my first post. A buddy of mine is looking at buying a 2000 grand touring 700, I think it's a triple, I could be wrong. It's has 15000 miles but is apparently well maintained ( in my experience every used sled has been diligently cared for... Sarcasm) he's looking for a yard sled to...
New to forum, but not snowmobiling or working on them. Bought a low mileage 2000 Formula Z 600 with a burnt out piston. Come to find out the right side cylinder head is scored pretty nicely. Looking to find one in the used realm, but need to know what years and models they used the...
Hey guys, I've got a 02 mxz 700, bought a 151 skid from a high mark and I'm looking for the ctc distance of the two mounting holes, I've looked everywhere online and I can't find anybody who has posted it, any info would be great!