Ski-Doo Snowmobiles Forum banner
600 etec
1-20 of 43 Results
  1. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Looking to upgrade the pipe on my 2014 600 etec. I see that SPI makes one(134-133). Just wondering if anyone else has done this upgrade or has any other info regarding it. Heres the link...
  2. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    I have fewer than 2900 miles on my 2016 Renegade 600 etec, got a check engine light and high-temp light (I don't have a temp gauge) and found the EGT sensor had come unscrewed from the muffler when I opened the panel. I screwed the EGT sensor back in and checked the fuses, disconnected the...
  3. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    I've got a 2017 600 Renegade with less than 1000 miles on it. I think it's been doing this since new. Problem 1- It will only top out at 7800 RPM. And that's on flat smooth lake/trail with hardly any loose snow. I might get 85 MPH or a little higher on GPS. Seems low top speed and RPM...
  4. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    Posting for a friend. 2015 mxz x-rs 600 etex. Bogg/delay when first taking off then takes off fine. Barely moves during warm up. Intermittent misfire/pop around 1/4 throttle only. 4300 miles on chassis About 400 on new motor. Motor still has warranty from dealer that rebuilt it.
  5. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Hi everyone, I have a 2012 skidoo renegade x 600 etec with 10,000 flawless kilometers on it. I am thinking about freshening up the top end before next season just as a precautionary measure and I'm wonder what is the best way to break in these new pistons. I hear that the etec injectors don't...
  6. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    got a 2013 600 etec renegade bc with 2100 miles and a blown motor will a motor from a 2009 bolt right in
  7. Sled Parts For Sale or Trade
    Item: kyb x package shocks Category: Sled Year: 2008-2018 Location: shiocotn wi Price: 450 I have a set of like new kyb x package summit hocks with 100mi on them. They will fit xp and xm summit models or any sled with a 36"-38" stance. I am willing to ship. contact me at 920-358-4005 for pics...
  8. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    was riding this weekend when my ssled started having random power losses like it was running out of fuel or clutch was slipping 60 miles into our ride shut off no check engine light nothing tried restarting and it would crank but wouldnt turn over anyone else ever have a problem like this im...
  9. REV-XP / XM Chassis - Mountain Sleds
    I am looking into buying a new sled and came across a 2014 Summit SP 600 Etec 154" going for less than $5000. Only catch is it has 6500 miles, mostly trail ridden. I'm concerned about the high mileage, but is it worth it at this price?
  10. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    Hi folks, I've encountered a very frustrating issue, and of course it has reared its ugly head the friday of the free trail pass weekend in quebec. The sled is a 2015 600 etec renegade X. With the key plugged in, when I pull the kill switch up the sled starts up without touching the start/rer...
  11. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    So my question to all of you engine guys out there is.... when should I replace my rings and pistons on an etec engine? I'm about to buy an 09 MZX 600 H.O. etec with 5100 mikes on it and I had some guys at work asking me when am I going to replace the rings and pistons. This machine runs great...
  12. Skandic / Expedition
    2012 SWT 600 etec. Machine driving along fine, smelled something electrical like, engine light came on, started bogging, stalled out. Removed panels, found panel foam wrapped around brake disk. Removed foam, started back up, nothing coming up on cluster, revved machine, cluster lites up and...
  13. REV-XP/XS Chassis: Renegades/Freeride/Backcountry
    I tore my 2009 600 Etec apart again after doing a complete rebuild last season (top and bottom end) because of a meltdown. Only put about 300 miles on it since the rebuild. when I pulled the top end apart last week the Pistons looked not so good. I went with wiseco forged pistons and I am...
  14. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    Looking for plug gap and if plugs should be indexed or not...manual says to take to dealer.
  15. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    deleted
  16. Sledding - General Discussion
    I'm changing the piston and cylinder on a 600 etec, the typical ring locator pin failure. Luckily we got minimum damage. I didn't empty the antifreeze correctly and ended up getting antifreeze in the crank while remove the heads. (Doing the job with the engine in the sled). I quickly took...
  17. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    I was wondering what you guys would think if we lined these sleds up, and who would win in a 1/4 mile. The 11 600 etec has a ripsaw 1.5 and 24/45 gearing. The 06 renegade 600 sdi has a 1.25 with studs. and stock gearing.
  18. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    So I am looking at an 09 ETEC with almost 11K miles. compression tests out nice. Sleds never been rebuilt. I'm wondering what others are seeing for high miles on their sleds? And i you think its worthy of just doing the top end before a problem.
  19. REV-XP/XS Chassis: Perf. Trail 120-129 Inch Models
    HI everyone, im thinking of adjusting my clickers on my TRA for my 2011 600 ho etec, but first off i have 6 positions to chose from and i was wondering what each position indicates for rpms? they are currently on position 3. Any help would be much appreciated thanks.
1-20 of 43 Results
Top