Hey I am in the process of rebuilding my Rotax 294 twin and I have a question about the distance ring on the crankshaft.
This ring slides over the crankshaft and has the seal slid overtop it. Am I supposed to use any retaining compound to secure the distance ring to the crank? I don't want any...
I have a 1979 skidoo citation 300 that has the standard 114 x 15 track and I was thinking about swapping the skid out so I could run a little bit longer more common size track, like maybe a 121 x 15. The reason I want to do this is because the only 114 tracks I can find have 0.5" lugs but that...
I have a 79 citation 300 that I picked up for $75 that I've ridden for a few years and I love it, but the track is basically a rubber band. Now I also have a 1981? citation 3500 that I picked up for $50 that is kinda a POS but has a much better track on it and I was wondering if the 3500 track...
Item: 2011 Renegade Adrenaline 1200
Location: Grand Blanc, MI
ONLY 300 Miles! Just serviced w/0w40 Mobil 1,Amsoil synthetic chaincase oil, Mobil 1 grease in suspension. Comes with Stud Boy studs down the middle, Stud Boy shaper carbides, Bergstrum ski...
I saved this 1979 citation 300 from my local junk yard.
I was browsing the web looking for pictures of it when i ran into a weird problem.
I cannot find a citation 300 with a speedometer on it.
Mine has a speedometer that goes up to 100 mph it says its made by bombardier so im...
If you have an Old School Engine Build, or Big Bore, please post it. The more radical the better. If you have part numbers, and photo's, dyno sheets, that would be great. Pre 2000 motors only.
Does anyone still make a Stock, or a Billet Crank still, for the Skidoo 277(72mm x 66mm) single cylinder engine?
Has anyone ever Adapted a Skidoo 335/340 70mm Stroke Crank for a 277 Case?
Does anyone have a CAD/PDF/Paper drawing of the Skidoo 277 Crank, Engine Case, etc?
My 277 seems to be a...