Skandic WT 600 Ace
A project sled. Came to me as a trashed "utility sled" from a Ski Hill in NY. Abused in many ways and rolled down the hill more than once. Right Pogo was bent and twisted back 2 inches at the ski. Brake system held on by one bolt, with a second backed out and rubbing the rotor. The brake cover had a hole worn through by rubbing the rotor. 20 degrees of steering play. Some side panels held on with sheet metal screws, others with duct tape. Steering arm had been roughly welded back together by the throttle lever. One mirror and most of the windshield was there, The back seat was ripped off at the welds and the back light bracket above the bumper had been cut off with a sawsall. Full restore in progress.