Z YA LATER - Viewing Profile: Topics - DOOTalk Forums

Jump to content

 






Z YA LATER

Member Since 22 Feb 2007
Offline Last Active Apr 10 2021 08:06 PM
-----

Topics I've Started

Will 17' kyb fit my 14 xr

02 October 2020 - 07:12 AM

Will these fit my 14 xr. They are 17 and came off of the 2010 xrs and summit
Attached File  Screenshot_20201002-080727_Facebook.jpg   30.58KB   22 downloads

2016 skidoo enduro 1200 renegade throwing code po340

17 February 2020 - 05:38 PM

This is crankshaft position censor code correct? It's my buddy's sled. He has done the following before this happened. Took of the cowl, so had to unplug some things. He added a mbrp can also. He says he plugged everything back in correctly. He has roughly 4500 miles on the machine. He says it may be down on power a little. But cant tell much of any issues any where else.

98 mach z driving me nuts!

12 December 2019 - 07:58 PM

I just purchased a 98 mach z. It's in great shape. Original motor sawed itself through the case on the mag side. The guy I bought it from put a used 809 back in. He said it lost spark. So I took it home and cleaned carbs and fuel tank. I got it running. It ran on 2 cylinders at idle and I think all 3 when you put it in the stand. So I let it run for a min. Lost spark. Took the old stator and put it in and have spark again. Same issue doesnt run on all 3 at idle. Changed trigger coil no difference, changed flywheel , cleaned pilot passages and jets with air. Starts very easily. I am thinking crank seals. But would like to rule out the easy stuff first. I am gonna check and see what size jets are in it and check the clip position of the needle. Does the fuel screws have anything to so with the idle. Should I take them out and clean passage? Slides are set evenly. Sled smokes alot also. Oil pump looks to be in the correct position. I rode it in the grass and the sled rips. The middle cylinder seems to be the main one running. Pipe is hot. Cold pto at idle and warm mag. I bought a used cdi and it is bad. Any help would be appreciated.

Brp innovation and design 50 year anniversary.

15 November 2019 - 09:45 AM

Saw these photos on facebook. Thought it was interestingAttached File  Screenshot_20191115-092424_Facebook.jpg   18.67KB   64 downloadsAttached File  Screenshot_20191115-092616_Facebook.jpg   15.94KB   59 downloadsAttached File  Screenshot_20191115-092541_Facebook.jpg   14.63KB   59 downloadsAttached File  Screenshot_20191115-092147_Facebook.jpg   25.87KB   60 downloadsAttached File  Screenshot_20191115-092541_Facebook.jpg   14.63KB   54 downloads