AlanLaporte - Viewing Profile: Likes - DOOTalk Forums

Jump to content

 






AlanLaporte

Member Since 08 Apr 2012
Offline Last Active Today, 06:26 AM
-----

#23756727 Finally got to ride a BC, how much difference do the ZRP spindles real

Posted by AlanLaporte on 23 February 2021 - 06:24 AM

I had 3 sleds renny xrs, bcxrs, and regular bc. Both bc handle about the same and nothing flat like the renny. Not bad but added zrp to both bc. Helped but still not a renny. Ride with another buddy with bcxrs set a 40 and following him with my bcxrs its a little flatter handling but not way better. I probably ride 75% trail and my favorite sled is still the bcxrs 42 wide out of the bunch


#23738005 2022 Backcountry XRS or Freeride

Posted by AlanLaporte on 16 February 2021 - 07:39 AM

Agreed bcxrs a little less agile in the steep and deep but way better on trails


#23695463 2021 and jaws pipe

Posted by AlanLaporte on 28 January 2021 - 06:14 AM

I was running 8100 with jaws and shr kit. Saw someone loaded the clutch more and brought rpm down to 7900 and it was faster. Used to run dead even with test mule sled. Added weight and now pull away. Just my observation.


#23675817 2021 FreeRide 850T coming to the East Coast

Posted by AlanLaporte on 18 January 2021 - 05:26 PM

I like what your doing and following closely. The way you pulled away from other 850s on the lake id say your doing something right.
Carry on the pursuit for speed.


#23656165 Jaws, clutching

Posted by AlanLaporte on 09 January 2021 - 06:13 AM

2 sleds 18 and 20. Both needed 2 grams with jaws to bring rpm down to 8100. Used to be 8000 rpm. The 20 still over revs with over 2 grams


#23629775 2020 FR 850 vs BMP 860r Etec FR

Posted by AlanLaporte on 27 December 2020 - 02:58 AM

Same results 18 renny xrs vs rktek 860 renny. Both geared track and studded the same. Every time all season the bb would walk it after 600ft. 850 hole shot every time


#23616691 Oxygen or Mission Helmet

Posted by AlanLaporte on 20 December 2020 - 10:22 AM

I did 100 miles yesterday with my mission. Its awesome. Superior to the mod 3 in everyway.
I had the visor open and hot some fresh powder on the inside of the visor. When I close the Pfizer at kind of messed up my vision for a while and eventually melted and with clear on the inside. This is not plugged in at 10 degrees outside. A couple times a day I got a little bit of water that ran down the inside of the visor but that's the only issue. We were breaking trail and in a lot of powder all day. All other buddys had plug in, broken cords, freezing fogging issues. Mission not plugged in and perfect all day. Think I may have sold them on it. Its nice to have the option to plug in if i have to.


#23610329 22 Backcountry (146) Poll

Posted by AlanLaporte on 16 December 2020 - 02:07 PM

I want a 154 2.5 bcxrs 42 wide with factory turbo turned up to 200hp at sea level. Currently have this minus the turbo.


#23592419 Jaws 850 Pipe Install - Help!

Posted by AlanLaporte on 06 December 2020 - 05:32 PM

I bent the tabs a little closer to each other and drill/oblong the holes.


#23591421 Starting Point Setup

Posted by AlanLaporte on 06 December 2020 - 09:36 AM

I follow monster performance settings and that's a good starting point. I've also set everything to the middle and adjust thing 2 two clicks at a time and ride. Usually my first ride on a new sled I will stop every 10 minutes or so making tweaks and adjustments untull it does what I want it to and react the way I wanted to. Usually I set them open beginning and rarely touches adjustments after I'm happy with it. Set it forget it


#23580385 Clutch Alignment on 2021 G4’s

Posted by AlanLaporte on 30 November 2020 - 06:55 AM

.280 on clutch mount
.080 on mag mount
Pulled mag mount forward
.080 shimmed qrs out.




Which of the measurements are 280 and 80 ?

Did you mean an R-L of 0.028 and and a T-B of 0.080 with no load?




#23577717 Clutch Alignment on 2021 G4’s

Posted by AlanLaporte on 28 November 2020 - 05:59 PM

Did my 18 bcx today. 280 shim with red poly mount. Also .80 on mag side and had to move it forward. Also shimmed secondary. 080. This sled was killing belts every 500 miles. Guess ill find out in 500


#23558515 Adjustable limiter strap for BCXRS

Posted by AlanLaporte on 16 November 2020 - 06:16 AM

Nice job
  • NEK likes this


#23547551 Bar risers

Posted by AlanLaporte on 08 November 2020 - 07:41 PM

I used adjustable 5 to 8. 8 is max on my sled 2020bcxrs


#23525173 850 vs 850 Turbo

Posted by AlanLaporte on 22 October 2020 - 04:43 AM

I completely agree
Played the turbo game with an 850 with a company that said bolt on and go at low elevation. I didn't go spheres deep just the tip. Returned the set up.