Rev 2" track - REV Chassis - Performance and Trail Models - DOOTalk Forums

Jump to content

 






Photo

Rev 2" track


  • Please log in to reply
4 replies to this topic

#1 HadleyBoy62

HadleyBoy62

    Newbie

  • Members
  • Pip
  • 1 posts
  • Gender:Male
  • Location:hadley, MA
  • Interests:snowmobiling, farming, apprentice electrican
  • Sled:2006 Gsx, 2012 MXZ X

Posted 19 June 2020 - 07:51 PM

My buddy is buying a sled and a 2" track is part of the deal. I'd like to buy it from him and put it on my rev. I've read that you need to get 8tooth drivers to allow the 2"track to fit. What do you guys recommend for drivers?, and if i down size the drivers I'll have to change the gear ratio as well right? Any help appreciated

 

 



#2 Ditchbangr zx

Ditchbangr zx

    82 days till winter ☃️

  • DOOCrew
  • 92868 posts
  • Gender:Male
  • Location:Windsor Ontario
  • Sled:99 mxz 600 136" 05 Summit 800H.O 151"

Posted 20 June 2020 - 10:33 AM

Yes you may have to change drivers to get it to fit. What year sled is the track off of, cause you may need different pitch drivers as well?
Wahl Bro’s or Avid Products make drivers.
Going to the smaller drivers will change the gear ratio so you may need to buy some new sprockets for the chain case to get the gearing where you want it.

Welcome to Dootalk!!

#3 Ktm Fanatic

Ktm Fanatic

    Advanced Member

  • Members
  • PipPipPip
  • 174 posts
  • Gender:Male
  • Sled:2000 mxz 600 2004 600 summit HO

Posted 21 June 2020 - 11:10 PM

My 04 summit came stock with 10 tooth drivers and 2 inch track.


Edited by Ktm Fanatic, 21 June 2020 - 11:10 PM.


#4 IcutMetl

IcutMetl

    Advanced Member

  • Moderators
  • PipPipPip
  • 9036 posts
  • Gender:Male
  • Location:Vermilion Ohio
  • Interests:Boating, snowmobiling, machining, my dogs, and living life
  • Sled:2019 Freeride 154”

Posted 24 June 2020 - 08:37 AM

I helped put a 2” track on an ‘06 Renegade; stock drivers, removed tunnel protectors. Fit just fine.

#5 800PTEK

800PTEK

    Advanced Member

  • Members
  • PipPipPip
  • 701 posts
  • Gender:Male
  • Location:North Eastern Alberta
  • Sled:2018 MXZ XRS, Triple rev, Summit XRS MOD

Posted 27 June 2020 - 10:02 PM

As long as its not a 2003 with the short chaincase it will bolt right in. On the MXZ and renegades you will just have to remove the tunnel protectors as mentioned above.

 

Only the summits with 2.3" track needed the 9 tooth drivers when everything else was 10 tooth.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users