06 440x 210 jets & pump gas? - MXZX Race Sleds - DOOTalk Forums

Jump to content

 






Photo

06 440x 210 jets & pump gas?

carb jet 440x racesled

  • Please log in to reply
6 replies to this topic

#1 farrell1001

farrell1001

    Advanced Member

  • Members
  • PipPipPip
  • 38 posts
  • Gender:Male
  • Location:Gander NL
  • Sled:2019 Summit Sp 850

Posted 12 August 2019 - 12:24 PM

I am working on a 2006 440x with LC domes trail needles on the 2nd clip 210 mains and 25 pilots & The carbs do not have power jets. Based on the jetting forum most people with this setup should be running 300-320 MJ and this sled has 210.. the plugs seem quite rich actually but its hard to predict how it will run as it is in the mid 20's Celsius and humid. Any insight on why the 210 may be there? Also the previous owner had BR7 plugs in it

#2 PeterSmoreEater

PeterSmoreEater

    Member

  • Members
  • PipPip
  • 18 posts
  • Sled:2006 mxzx 440

Posted 12 August 2019 - 05:53 PM

That seems really lean for having the power jets plugged. On my 06 440 im running, with the power jets plugged, 280-300 mains, 25 pilot. 1.5 turns on the air screw and the needle all the way down. Runs great for me. But you should go up to at least a 280 id say.



#3 PeterSmoreEater

PeterSmoreEater

    Member

  • Members
  • PipPip
  • 18 posts
  • Sled:2006 mxzx 440

Posted 12 August 2019 - 05:55 PM

Oh and BR9ECS plugs but ive also heard of guys running the BR9EYA plugs too. BR7 plugs are too hot.



#4 farrell1001

farrell1001

    Advanced Member

  • Members
  • PipPipPip
  • 38 posts
  • Gender:Male
  • Location:Gander NL
  • Sled:2019 Summit Sp 850

Posted 12 August 2019 - 07:06 PM

That’s what I figured! The carbs don’t have power jets at all so I assume they are pre 06 carbs. Sounds crazy lean but it seems to run half rich to be honest.. almost have to wait for some colder temps to get a true indication!

#5 6timechamp

6timechamp

    Advanced Member

  • Members
  • PipPipPip
  • 250 posts
  • Gender:Male
  • Location:WI
  • Sled:2012 MXZ 800 ETEC TnT

Posted 13 August 2019 - 12:25 PM

210 is what you would use for drag racing. It may seem rich now, but on a wide open pull at -5, they will need 280s like the previous post



#6 TheBearAk

TheBearAk

    Advanced Member

  • Members
  • PipPipPip
  • 4614 posts
  • Gender:Male
  • Sled:2015 Skidoo Renegade BC 600 etec

Posted 13 August 2019 - 03:12 PM

I agree, 7 is to hot.   9 is standard.

 

Not much difference between BR9ECS and BR9EYA and BR9ES.    EYA is what Arctic Cat recommends for darn near everything they ever sold in the past.   It has a V groove in the electrode that is suppose to help against fouling.   

 

ECS has a low Angle ground electrode.

 

 

I've been running BR9EYAs in everything that calls for a BR9 style plug.   They seem to work better for my old Touring E 380, but really haven't noticed a difference in the other sleds.



#7 440x

440x

    Advanced Member

  • Members
  • PipPipPip
  • 3082 posts
  • Gender:Male
  • Location:Albany, NY
  • Sled:'16 1200 Renegade XRS

Posted 13 August 2019 - 03:22 PM

Br9ecs would break up at 8000 plus on my 440 in race mode with a "tight" motor. Br9es resolved the issue. Both gapped the same. For what it's worth...

Edited by 440x, 13 August 2019 - 03:23 PM.






Also tagged with one or more of these keywords: carb, jet, 440x, racesled

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users