Jump to content

 





jxt035

Member Since 31 Jan 2010
Offline Last Active Jan 09 2013 03:04 PM
-----

Posts I've Made

In Topic: 600sdi not starting

04 December 2012 - 02:00 PM

check it for spark. go from there

In Topic: 600 HO Crank Bearings ( Crank specialists )

03 December 2012 - 08:05 AM

all of the outer bearings are sealed and use isoflex for lubrication.the center bearings have an oil bath.
if you dont want to do the crank at very least to a leak test to make sure you dont have leaky carb boots or seals

In Topic: 2004 Renegade weak spark

23 March 2012 - 08:45 AM

it is the plastic cowl that has the dash and gauges attached to it. There's 2 little screws at the very front and 2 on the side, then it just pulls out of the way. it's really easy to do. hope it works for you

In Topic: 2004 Renegade weak spark

19 March 2012 - 07:44 PM

there is a connector on the main harness going up to the handlebars that gets corroded. It will cause intermittant/no/weak spark. Seriously before you try anything else check the plug.
It happened on my friends sled, started the sled on the trailer, backed it off, shut it off to gear up then it had no spark.

In Topic: 2004 Renegade weak spark

14 March 2012 - 08:56 PM

check the main harness connector going up to the handlebars. You have to take the plastics off to get at it. it will cause weak/ no spark.