prairierider86

i just purchased a 04 800 ho summit that really likes its fuel. i'm using a tank of fuel in a little less then 20 miles. something is most definitely wrong. it has 380 mains and 17.5 pilots. needle and seats are holdiing pressure. i replace the o-rings on the outside of the seats since they had dried up and were leaking. all cables are set properly. pressure tested the pulse side of the fuel pump and it held pressure. the dpm was slightly leaking around the the plastic bushing on the dpm solenoid but i have fixed that problem by replacing it wit a o-ring. it has v-force 3 reeds with the intake spacers installed. have not yet checked to make sure there is voltage to the dpm. the raves are opening but unsure if they are supposed to suck right down like the e-raves do on the new sleds. throw me any ideas here i'm running out of them myself. thanks