Jump to content

 





powderlites

Member Since 16 Nov 2004
Offline Last Active Yesterday, 11:47 PM
-----

Topics I've Started

Rapid Bike Racing

07 March 2013 - 10:58 AM

Download for Windows 8 drivers so you guys can connect using Windows 8

http://reserved.dims...tDriver_011.zip

 

RBR software is free just register on Dimsport reserve area with your serial # off the box/ECU for any updates.

 


TAPP Clutch Tuning

29 January 2013 - 03:20 PM

Here are some pictures of TAPP tuning parts.

Rate of springs   Blue 101 -190, Black 120-190, Red 160-267

weights washers 1.gram each  Heavy race weights come in 8 grams and 10 grams. Allen 1/2" bolts are 2.6 grams each

21 ramps are for 2 stroke non turbo, 22 are most common for 4 stroke turbo with low engagment.

 

http://powderlites.com

250-836-4422

 


PowderLites garage sale

11 September 2012 - 02:19 PM

We have 137 complete air suspensions out of 1200 Skidoo builds and other related parts like plastics etc for sale.
Make us a offer
Stock clutches etc
stock air boxes
Tracks
We make these sleds into mountain units with EZ-Ryde and 163" in XP plastics.
http://www.powderlites.com
250-836-4422

TAPP Clutch sale

03 August 2012 - 04:30 PM

Powder Lites Pre-Season Sale – Get it while it’s HOT!
Order a TAPP Clutch before Sept 30, 2012 and we’ll include a Motor Mount Shim Kit AND a Clutch Brace for FREE - $182 value!  
The Clutch Brace will keep the clutches aligned and brace the factory clutch tower down to the engine support.
The Motor Mount Shim Kit will achieve proper motor and clutch alignment by eliminating the freeplay on stock PTO motor mounts. You’ll get better belt life and a higher-performance, cooler-running clutch – for FREE!
* $800 refundable deposit required.  Remaining payable upon shipment.
CONTACT POWDER LITES AT 250-836-4422 or Email us for more info

Oring Head Spacer or Shim

05 July 2012 - 02:36 PM

For three years we have supplied the stainless steel oring head spacer and ARP head studs with our stage 3 kits.
We upgraded the spacer last year for better sealing. This is a really good way to build a safe boosted sled without the extra expense of disassembling your engine and installing pistons.
Price on our head spacer with the stainless steel orings is $175.
We also have oil tank off set adaptors and cam chain tensioner spacers available.
My link
250-836-4422