Jump to content

 




  2. → Viewing Profile: Posts: plusxman

plusxman

Member Since 19 Oct 2009
Offline Last Active Jan 14 2013 10:03 AM
-----

Posts I've Made

In Topic: What could be the problem/ compression

27 January 2012 - 06:08 PM

What should it be normally torqued at? 18 or 20?? Thanks guys for all the info.. and advice..

In Topic: What could be the problem/ compression

27 January 2012 - 05:56 PM

ya i get 130 140 cold on my 670 new rings needed mostlikely



What should it be normally torqued at 18 or 20?

In Topic: What could be the problem/ compression

27 January 2012 - 01:43 PM

Bad compression tester?
Did you drop a little oil down the plug holes to get a better seal between rings and cyls?
was your test done on cold or warm motor? If 95 is accurate I would have to guess you did not have it running



this was done on an engine that doesnt work\cold engine.... just that my sled was dying while I was riding. So now the pistons have 95 for compression. I'm just trying to find out the problem.. What it could be.. Its doesnt want to start. So compression should be at 125 roughly, started or not? is this correct?

In Topic: MXZ engine died..

08 January 2012 - 11:37 AM

compression is good, there is fire, and new plugs..


Need more info, is it locked up, spark, fuel, compression?


  1. DOOTalk Forums
  2. → Viewing Profile: Posts: plusxman
  3. Privacy Policy
  4. Rules ·