Jump to content

 





bluffcountry440

Member Since 02 Nov 2004
Offline Last Active Today, 03:22 PM
-----

Topics I've Started

Parting out - 2000 Ski doo MXZx 440

23 March 2013 - 11:24 PM

Item: Parting out - 2000 Ski doo MXZx 440
Category: Sled
Year: 2000
Location: SE Minnesota
Price: Varies

I am parting out my 2000 MXZx. All parts are available; see below for a brief description of items. Please send an email to andyarends@q.com or call/text me at 507-251-7462 if interested in anything and we can discuss cost.

121x15x1.375 Cat track in great shape (2.52 pitch) - sold
VForce 3 reed set up with carb boots - $125
Lightweight primary (empty - no spring or weights/pins) - sold

Roller secondary clutch with rollers in great condition (empty - no spring or helix) - $50

Dynamo Joe SX4 clutch kit - sold

Between the Lines Design Quick Clickers - sold
Black hood with MXZx decals - sold
Black front bumper (great shape with no cracks) - sold
Headlight with bulbs - $20
Parting out chassis (coolers, black bellypan, MXZx supports, cooling lines, etc.) - $?
Flat side TMX 34 carbs (with 290 mains, 2 sets of 35 pilots and 1 set of 25 pilots), which includes throttle and injection cable - $100
Airbox - $10
Handle bars with RSI heated grips, brake master cylinder, throttle flipper and kill switch - $50
White Sly Dog skis with 9 inch Shaper bars - sold
Front rebuildable shocks (pair) - sold
Rear (one is a C46) rebuildable shocks (pair) - $250
Parting out the entire skid (shocks, rails, torsion springs, limiter straps, shafts, etc) - $?
2 jugs/cylinders with RAVE valves in good shape - $100 each

1 used piston (std) with ring and bearing (approximately 500 miles) - $20
Head with low comp domes, thermostat and sensor - $100

Water pump cover - $5

Crank case bolts - $5
4" Riser - $25
Steering post - $50
T post adaptor - $10
All black idler wheels - $10 per wheel/bearing
Short smoked windshield - sold
Black headlight thong bezel - sold
Oil tank - $20
Clear fuel tank with new line and filter - $50
Chaincase - $20 per half (inner half includes dip stick and two good seals)

Chaincase bearings - $5 for both upper and lower
Gears/chain (21T and 43T) - $25 for all 
Drive shaft with bearing in good shape - $25
Jackshaft (keyed) - $25
All black seat with extra foam added, so you sit up a bit higher - sold
Aftermarket braided brake line - sold
Stock exhaust pipe and muffler - ceramic coated in flat black - $125 for set
Y pipe - ceramic coated in flat black - $25
Exhaust springs - $10
Boost bottle - $5
Delrin washer and shim to 'float' secondary clutch - $20
BC3 torsion spring spacers - sold
Trailing arms - sold
Speedo and tach - $20 each
Recoil - $25
Coil - sold
Head bolts and cylinder bolts - $25 for all
Oil pump - $25
New fuel pump...about 1 hour of run time on it - $40

Cover All cover - sold

2 usable belts (414860700) - $10 each

Black grill set - sold

Wiring harness - sold

tether - sold

CDI - sold

Handwamer switch - sold


Prices do not include shipping. I am located in SE Minnesota (Chatfield). If you want to see pics of anything, let me know.

Thanks for looking...


Parting out - 2000 Ski doo MXZx 440

23 March 2013 - 11:20 PM

I am parting out my 2000 MXZx. All parts are available; see below for a brief description of items. Please send an email to andyarends@q.com or call/text me at 507-251-7462 if interested in anything and we can discuss cost.

121x15x1.375 Cat track in great shape (2.52 pitch) - $200
VForce 3 reed set up with carb boots - $125
Lightweight primary (empty - no spring or weights/pins) - $100

Roller secondary clutch with rollers in great condition (empty - no spring or helix) - $50

Dynamo Joe SX4 clutch kit - sold

Between the Lines Design Quick Clickers - $20
Black hood with MXZx decals - $75
Black front bumper (great shape with no cracks) - $20
Aluminum rear bumper - $20
Headlight with bulbs - $20
Chassis with Rox sledtreads, coolers and black bellypan - $100
Flat side TMX 34 carbs (with 290 mains, 2 sets of 35 pilots and 1 set of 25 pilots), which includes throttle and injection cable - $100
Airbox - $10
Handle bars with RSI heated grips, brake master cylinder, throttle flipper and kill switch - $50
White Sly Dog skis with 9 inch Shaper bars - Sold
Front rebuildable shocks (pair) - $150
Rear (one is a C46) rebuildable shocks (pair) - $250
Skid w/o shocks - $125
2 jugs/cylinders with RAVE valves in good shape - $100 each

1 used piston (std) with ring and bearing (approximately 500 miles) - $20
Head with low comp domes, thermostat and sensor - $100

Water pump cover - $5

Crank case bolts - $5
4" Riser - $25
Steering post - $50
T post adaptor - $10
All black idler wheels - $40 for all
Short smoked windshield - $25
Black headlight thong bezel - $25
Oil tank - $20
Clear fuel tank with new line and filter - $50
Chaincase - $20 per half (inner half includes dip stick and two good seals)

Chaincase bearings - $5 for both upper and lower
Gears/chain (21T and 43T) - $25 for all 
Drive shaft with bearing in good shape - $25
Jackshaft (keyed) - $25
All black seat with extra foam added, so you sit up a bit higher - $75
Aftermarket braided brake line - $20
Stock exhaust pipe and muffler - ceramic coated in flat black - $75 for set
Y pipe - ceramic coated in flat black - $25
Exhaust springs - $10
Boost bottle - $5
Delrin washer and shim to 'float' secondary clutch - $20
BC3 torsion spring spacers - $25
Trailing arms - $25 each
Speedo and tach - $20 each
Recoil - $25
Coil - $25
Head bolts and cylinder bolts - $25 for all
Oil pump - $25
New fuel pump...about 1 hour of run time on it - $40

Cover All cover - $40

2 usable belts (414860700) - $10 each

Black grill set - $20

Wiring harness - $20


Prices do not include shipping. I am located in SE Minnesota (Chatfield). If you want to see pics of anything, let me know.

Thanks for looking...


ZX 440 cuts out at/near wide open

09 March 2013 - 06:25 PM

During a ride last night, my 2000 440 would cut out at wide open intermittently.  When I say cut out, it was like someone hit the kill switch and it would slightly throw you forward.   It was doing it fairly frequently early in the ride, but as the night went on it seemed a little less infrequent.  The carbs and clutches are clean and in good shape, sled idled where it should and ran great otherwise, it just occurred intermittently as you neared full throttle.  

 

I did not experience this issue the night before while riding 20 miles or so.  Prior to riding last night, I filled up with 93 octane at a local gas station.  Could it be poor fuel related...?

 

What are your thoughts regarding the cause of this; weak fuel pump, coil going bad, poor fuel...?

 

Any help/insight would be greatly appreciated.

 

Thanks..


ZX 440 cuts out at/near wide open

09 March 2013 - 10:22 AM

During a ride last night, my 2000 440 would cut out at wide open intermittently.  When I say cut out, it was like someone hit the kill switch and it would slightly throw you forward.   It was doing it fairly frequently early in the ride, but as the night went on it seemed a little less infrequent.  The carbs and clutches are clean and in good shape, sled idled where it should and ran great otherwise, it just occurred intermittently as you neared full throttle.  

 

I did not experience this issue the night before while riding 20 miles or so.  Prior to riding last night, I filled up with 93 octane at a local gas station.  Could it be poor fuel related...?

 

What are your thoughts regarding the cause of this; weak fuel pump, coil going bad, poor fuel...?

 

Any help/insight would be greatly appreciated.

 

Thanks...


WTB: Black Rev hood and console

18 August 2012 - 02:11 PM

Looking to buy a black hood and console for a 2004 Summit.  Must be in good shape and free of any cracks or major gouges.  Console must be for the Summit with no opening for the gas gauge.  If you have one or both of these for sale, please send me pics and price to andyarends@q.com.

Thanks...