stockrev600ho

Guys,

I dont have this installed, do they have one you can buy thats a plug and play?  I normally use a snowcross helmet but were heading to Canada next week and its probably smart to use a heated shield.  Thoughts?  I have a great snowcross helmet with 509 goggles that work great in NY but I heard its cold as "edit for bad language" up there when riding.

So today we finally got some snow. I started my sled and loaded on the trailer with no issues. Brought it to a buddy's house to add risers before our ride today. I back it of the trailer into the garage without any issues or signs. Add the risers and the powermadd throttle kit once this was done I wanted to check the carbides so I tipped the sled with the throttle side down to check the left ski after I did this I let it down and tried to start the sled but had no luck. Long story short is added riser extended throttle cable and turned sled on its side. Now it won't start at all. It turns over both plugs are clean with spark and gas reaching them. Battery is good and keeps turning it over. The display tells me to check key if I hold the starter button down long enough but if I check the key it does nothing.

Please help I'm lost. Any ideas.

Sorry for long story

Stock skies on a 08 800 are pilots right?

Can anyone tell me what part number this is for a 2008 800 renegade, i circled it in yellow in the image?

I think its this one but im not sure - SUPPORT MOULEE *SUPPORT-CAST.503191833





http://imageshack.us...s/171/skid.png/

Last year I had my top end rebuilt and today I noticed a leak on the floor underneath by the front of the sled.  The leak is right where the track starts to loop back around to the back of the sled.  It looks like the rivets are really loose, Ive attached a picture can anyone explain what this is and how can I fix it?  The fluid looks to be either chain case oil or motor oil.  

I can almost move this piece in and out a little causing a small gap.  
 leak under sled.jpg   29.73K   2 downloads