Jump to content

 




  2. → Viewing Profile: Posts: Doo me

Doo me

Member Since 27 Feb 2004
Offline Last Active Apr 05 2013 11:51 AM
-----

Posts I've Made

In Topic: belt adjuster keeps coming off

14 March 2013 - 05:55 AM

Loctite, yes.  Torque is around 90 ft/lbs, but you won't get a torque wrench on there, use a large cresent wrench and tighten er good.


In Topic: Popped a cord but how bad is it? Photo

06 March 2013 - 06:18 AM

I have had luck putting some 5 min epoxy over both ends of the cord inside the groove.  Prevents any more cord coming out.


In Topic: Front end tweaked

13 February 2013 - 06:50 AM

Use a large solid pry bar (spud bar) and insert into lower arm and pry against the top front A-arm.  This will push the lower Arm forward and the top Arm back to it's original position, and you can control the amount vs. hitting with a hammer.   Did this on mine, and has been fine ever since. 


In Topic: secondary clutch?

05 December 2012 - 08:21 AM

Rollers are supposed to offer less resistance, increasing your rate of backshift.

  1. DOOTalk Forums
  2. → Viewing Profile: Posts: Doo me
  3. Privacy Policy
  4. Rules ·