revchamp440

going from memory the rear scissor bolt that mounts to tunnel from the floor to bolt center 6 3/8'' to 7 1/4'' for sc10. it may differ from your c-7 suspension, the front arm set up should be the same though i would think for 2 inch travel. get some 30 degree ice picks and 10" competition carbides.

on your rear suspension set your front arm to bumper stops on rails to 1'' to 1.5'' before touching rails with limiter straps and no preload on center shock so its easier to compress and strap. make bottom of track and rails flat and inline with bulkhead by strapping rear scissor. use 2" block of wood or square tubing  under bulkhead to measure ski shock bolt centers without shocks on. Iceman1992 uses 11inch ski shocks for f chassis. me and friend set up 2 zx chassis's  one with a sc10 and one with sc10II they both use 13 inch shocks on skis and so we dont have to strap rear scissor 13 inch shock there also. good set up for ice lemans easy to steer arms dont get tired and sits nice and flat.

that's what mine is 800 big bore from a 600 base short stroke. i found out the 600 cylinders would work.

the reason i ask is i have a bunch of core 600 cylinders. my 800 from 600 base has sleeved 700 cylinders

count the plates on the links should be 13wide