76 replies to this topic

[09tnt]

Well lets get this going. Need something to look at durning the summer on this site guys.
Here's my project.
2008 Ski Doo 600RS Mod
Dialing in the pipes to run pump gas
Hot Trail Curve reflash
Replacing E mod.
Powder coating a arms and spindles black.
Powder coating lots of parts under the hood just because i can haha.
New track.
Custom Midwest Freeriders snow flap from proven designs.
Probably forgetting some stuff but will post pics!

[mxzeatr]

Lets see...

The REV's are mine, I had sent the spindles from both, and upper a-arms off the summit to get powdercoated.



Then started my switch relocation mod, and new handlebar setup with RSI 2" rise bars.



Switch relocation.





Decided to have the skid done up nice too.



Just bolted it back in the other day.




I grabbed ahold of this lil sled to 'flip' becuase it was super cheap.





Here's what I found in the carbs, and why it wouldn't run good.



After.



Sled all cleaned up ready to sell.

[09tnt]

Heres a edit i put together of my sled build/fix. Check it out let me know what you think!

[Yamadoo500]

Heres a edit i put together of my sled build/fix. Check it out let me know what you think!

Great video and editing also! Looks like a pretty sick build! Can't wait to tear into my XP projects also...

[Tom McPhersom]

Cool video! that sled must RIP. hope to see the sled after.

[AK Rick]

I had planned a complete rebuild on my 02 summit........but it looks like I will be out of town hangin with these guys most of the summer!

 Polar_bears_on_the_Beaufort_Sea_coast.jpg   54.49K   10 downloads

[AKToad]

What camera did you use? Very nice edit and nice sled. I will start a build thread for my RS this fall but the plans are 141" 2.25" power claw track on 141 ice age rails with the backcountry cut, S and E module, rebuild all the shocks, and build a 770 for it. I might try and use Toms uncouple kit on the rear skid but the jury is still out. I will most likely powder coat everything since I have full access to a powder coating shop and the cost is free. So far I have everything minus domes, but its time to go to work for the year so I can take the 6 months of winter off.

[Eman0993]

Got started on the FreeRide.
1) Full Grip and Rip Bracing
2) powder coated front suspension white. Rails powder coated white also. Front shocks will be gold at powder coater already.
3) C&A XTX skis also white.
4)Fly adjustable risers.
5) Bondi air box& vent
6) Getting the Skinz AirFrame boards powder as we speak. Installed in a couple weeks.
7) ordering full SLP exhaust next week.
I can only hope this is the end of the list that I do to this but I know it's not.
 ImageUploadedByTapatalk1338362157.812953.jpg   19K   15 downloads
 ImageUploadedByTapatalk1338362173.498061.jpg   20.52K   11 downloads

Attached Files

•  ImageUploadedByTapatalk1338362066.664499.jpg   160.44K   7 downloads

[09tnt]

What camera did you use? Very nice edit and nice sled. I will start a build thread for my RS this fall but the plans are 141" 2.25" power claw track on 141 ice age rails with the backcountry cut, S and E module, rebuild all the shocks, and build a 770 for it. I might try and use Toms uncouple kit on the rear skid but the jury is still out. I will most likely powder coat everything since I have full access to a powder coating shop and the cost is free. So far I have everything minus domes, but its time to go to work for the year so I can take the 6 months of winter off.

Canon T2i
Thanks!

[tommc56]

I had planned a complete rebuild on my 02 summit........but it looks like I will be out of town hangin with these guys most of the summer!

 Polar_bears_on_the_Beaufort_Sea_coast.jpg   54.49K   10 downloads

Very cool Rick , doo share the details when you get time .

[AK Rick]

Thanks Tom

But maybe I should start a new thread? This one is about sleds not bears and adventures.

[Rotax_Kid]

Few things to do..

FInish tinkering with a Rmotion in a 146" length
Permiter cooling for a bit more capacity.
External intake up in the console.

Done after this...time to move on to another project next year...fingers crossed Doo has something I want to build on, as I don't know if they do this year.

Attached Files

•  IMG_1936-1.jpg   29.6K   7 downloads

[2001mxzlongtrack]

not sure if this pic will work or not, but doing some motor work on my 10 tnt. 500ss big bore, porting, head, reeds. possible rail and track extension, with 2.52 drivers. biggest summer project will be trying to figure out how to get winter to come early!!  DSC00093.JPG   99.19K   6 downloads

[09tnt]

not sure if this pic will work or not, but doing some motor work on my 10 tnt. 500ss big bore, porting, head, reeds. possible rail and track extension, with 2.52 drivers. biggest summer project will be trying to figure out how to get winter to come early!!  DSC00093.JPG   99.19K   6 downloads

That thing looks sick! Nice work

[2001mxzlongtrack]

That thing looks sick! Nice work

thanks man! put a ton of work into it last summer, all before i rode it once. all was worth it too. i love this stuff!