13 replies to this topic

[Doo-man_2]

I was wondering if these would work on a 121" sled ? Seems like most I have read about them on DooTalk they are for the long track. Do they make something for the short tracks ? I hate the snow build up on the running boards and I need to "Beef" them up a bit as I bent one like a taco last winter with my aggressive riding. I am 6'1" and weigh about 220 lbs. without any riding gear.

Your thoughts and suggestions would be greatly appreciated. I ride both on and off Trail and have been known to hit a few jumps.

Thanks - Josh

[qiksilver]

I'm sure you have to call to have them custom made. I spoke with them awhile back and they will make them if you provide the measurements. I will be calling myself to have them made for myt son's short track sled.

[Doo-man_2]

Cool thanks bud ! I guess I will give them a call. I thought even if they were longer I could mod them to fit. I knew I was not the first one to try this and they seem to be the best thing since pockets on a shirt...lol

[Maize]

Yup. Terry can make them to whatever measurements you give him.

I have had him several of them for me.

Here are the ones on my 121". I combined the Snow Eliminators with new VanAmburg edge rails and 440X footwell bracing. It makes for a VERY solid platform.

[Doo-man_2]

Thanks Maize ,
I think this is going to be one of my summer projects. Where can I get those VanAmburg edge rails?

[Maize]

Thanks Maize ,
I think this is going to be one of my summer projects. Where can I get those VanAmburg edge rails?

Just call VanAmburg and TT LIZ. Just tell her that you want the Arctic Cat stock with no bends. Just tell here that them shipped like she ships them to A-MAIZE-ING KUSTOMS. Just notch the part that attaches to the running where it bends then heat them and bend them.

[Doo-man_2]

Thanks Maize. Your project there looks sick ! That's exactly what I wanted to do to mine, and I got all summer to get it done. I will post the pics when I get them done.

[Maize]

Thanks Maize. Your project there looks sick ! That's exactly what I wanted to do to mine, and I got all summer to get it done. I will post the pics when I get them done.

Let me know if I can help. That was the only sled I did not change the basic design of the running board.

I would definately recommend the 440X footwell bracing. That beefs it up a lot, the Snow Eliminators, Van Amburg edgerails and the 440X footwell brace. I had a couple of hard landings and no bending issues.

Keep us up to date with pictures..

[Doo-man_2]

Let me know if I can help. That was the only sled I did not change the basic design of the running board.

I would definately recommend the 440X footwell bracing. That beefs it up a lot, the Snow Eliminators, Van Amburg edgerails and the 440X footwell brace. I had a couple of hard landings and no bending issues.

Keep us up to date with pictures..

Ok will do thanks for the help. Got to get the parts coming, and see if I can get a line on some 440 braces.

Thanks again Maize

[Maize]

Ok will do thanks for the help. Got to get the parts coming, and see if I can get a line on some 440 braces.

Thanks again Maize

I can order them for you. I am a Ski-Doo wholesaler. I have an order going in this week, just let me know.

The part numbers you need are: 518 323 187 List is $31.99
518 323 188 List is $31.99

I can get them for $27 each, shipping would be around $6.00.

If not me, at least you have the part numbers you need.

[Doo-man_2]

I can order them for you. I am a Ski-Doo wholesaler. I have an order going in this week, just let me know.

The part numbers you need are: 518 323 187 List is $31.99
518 323 188 List is $31.99

I can get them for $27 each, shipping would be around $6.00.

If not me, at least you have the part numbers you need.

Well it looks like I wont get to start til mid summer now. Being a single DAD my 2 daughters just decided they want to play travel ball this summer. So with registration fee's, hotel fee's, gas ,and food my " MAD Money " will be running thin for a few...lol. I would def.. like your thoughts on the build when I start.
Thanks again Maize !!

-Josh

[Goughie]

Hmm i must post in here since i was about to make my own This summer im 110% sure im tossing thoes stock runnign boards on my 04 renegade X...there just so poop! I dont want the full wide boards but will the regular ones even fit a renegade? or are these summit only? Can i cut them to fit the renegade without crazy hacking/modding? Sorry for any thread jacking !

[Maize]

Hmm i must post in here since i was about to make my own This summer im 110% sure im tossing thoes stock runnign boards on my 04 renegade X...there just so poop! I dont want the full wide boards but will the regular ones even fit a renegade? or are these summit only? Can i cut them to fit the renegade without crazy hacking/modding? Sorry for any thread jacking !

That is the nice thing about Jerry at Snow Eliminators. If you send him the measurements he can make them.

[Goughie]

Thanks maize, didn't know that was a option, how would one or i go about measuring what i need? would i start from the front footwell to the very end of board? or from the skid bolt to back?