5 replies to this topic

[MotoRudyX]

I'm installing a fuel pressure guage (Autometer 4312) on my 2007 1000 SDI Renegade. I can't locate a simple Tee fitting like I've seen posted. Most fitting combinations I find at auto parts stores, plumbing supply places and Home Depot end up combining several pieces before I get a huge unattractive mess of a connection. Where do you get a simple Tee fitting that will fit into the fuel line after the filter and adapt to the guage line? Also, has anyone found a replacement filter (auto or other) for the $60 OEM? The stock filter has orinted on it "082406K1 Made in USA." Have googled that and gone to the parts store with no luck.

[RX7MachZ]

I'm installing a fuel pressure guage (Autometer 4312) on my 2007 1000 SDI Renegade. I can't locate a simple Tee fitting like I've seen posted. Most fitting combinations I find at auto parts stores, plumbing supply places and Home Depot end up combining several pieces before I get a huge unattractive mess of a connection. Where do you get a simple Tee fitting that will fit into the fuel line after the filter and adapt to the guage line? Also, has anyone found a replacement filter (auto or other) for the $60 OEM? The stock filter has orinted on it "082406K1 Made in USA." Have googled that and gone to the parts store with no luck.

Filter G3606 by fram. "T" brass unit. It's readily available at local harware stores and auto parts.

http://www.ebay.com/...1bf84b7&vxp=mtr

http://www.ebay.com/...e0e4c75&vxp=mtr

[MotoRudyX]

Filter G3606 by fram. "T" brass unit. It's readily available at local harware stores and auto parts.

http://www.ebay.com/...1bf84b7&vxp=mtr

http://www.ebay.com/...e0e4c75&vxp=mtr

Thanks. I have found those Tees but they are barbed on all sides. I need a threaded side going to the guage.

Any idea on the pressure rating of the filters? I can't find their specs and they seem to be made for late '80s cars where I'm not sure they would require 60 PSI, but I could be wrong.

[Daag44]

Details to SkiDoojunky's fuel psi gauge kits:
http://www.dootalk.c...howtopic=480975

[MotoRudyX]

Thanks all. Finally found the right combo of fittings. 5/16 barbs weren't easy to find around here.

[MotoRudyX]

Oh, and I got a NAPA filter for $4. Found more on that thread.

Attached Files

•  IMG_9165 (Large).JPG   62.41K   3 downloads
•  IMG_9167 (Large).JPG   42.28K   3 downloads