5 replies to this topic

[fastfIII]

Hello, just have a concern where my buddy and I installed an SC10 suspension on my 94 Summit...well not fully done yet ran out of time on the weekend just need to move the plate ahead for the rear bolt in the back and its complete!! But my question is that the suspension came without the wheels so we installed my old ones on it but i did some research and found the back wheels are much larger from my 94 than the SC10 so this means 190 wheels instead of a 165, would this be ok to run the same without any issues? Any replies would be much appreciated,thanks in advance!!

[Ditchbangr zx]

I dont think it would make a diffrence as long as you have enough room on the axle adjustment screw.

[fastfIII]

I dont think it would make a diffrence as long as you have enough room on the axle adjustment screw.

Yeah there is enough that we checked but I will find out tonight when we finish it, thanks for your reply!!

[fastfIII]

I dont think it would make a diffrence as long as you have enough room on the axle adjustment screw.

Everything is on but the problem is that there is no adjustment so have to get me some smaller wheels but thats all..... change them and ride!!!

[Ditchbangr zx]

The 165 is 6.5", the 190 is 7.5". You should be able to fit it, people run 8" wheels on Zx chassis sleds. I know your not on a ZX chassis but I figured an inch wouldn't make a difference.

[fastfIII]

Yeah the back axle is riding at the end of the slot where the axle goes not much room for adjustment unless we did something wrong!! I'm getting the smaller wheels maybe today if my buddy can get them for me and change them on the weekend but let me tell you what a difference in looks and driving as well!!!