RPM PROBLEMS
#1
Posted 03 February 2012 - 11:42 PM
#2
Posted 04 February 2012 - 03:31 AM
#3
Posted 04 February 2012 - 05:34 AM
Ski-Doo Renegade BCX 800 E-tec -11
Lynx RE 800r PowerTek -09
Ski-Doo MXZ X-RS 600sdi -07
Ski-Doo MXZ X 600sdi -05
Polaris 500 SKS -01
Lynx Touring 500lc -00
#4
Posted 04 February 2012 - 07:06 AM
#5
Posted 04 February 2012 - 07:23 AM
2012 etech800X dropped 400 RPM2011 800 X ETEC Clutch kit and 26T gear NO rpm issues at all....very consistant sled!
#6
Posted 04 February 2012 - 07:46 AM
#7
Posted 04 February 2012 - 08:06 AM
Full SLP vent kit, Throttle body heater delete, Bondi temp relocator, Team TSS-04 secondary.
Everytime i install the QRS secondary back on, the darn thing falls in RPM on top end, on a warm days. Cold days the QRS will hold rpm ok, but warm day down she goes, 7600rpm top end. I don't like this QRS secondary, the bushing are way to loose and the moveable sheave flops around like a limp d-ck. Sorry for the term, but i just don't like this QRS. I have struggled with falling rpm on these QRS since 2008.
Have fun i am going riding.
2010 XRS 800R.
XP Gade 800R Trygstad porting: Sold
XP Gade 800R Bondi porting: Sold
2009 XP Gade, 860R :Sold
2009 TNT SHR-700 conversion, One sweet little sled.
2008 600 XP SDI MXZ, Boondocker box, 1.75x16 track: Sold
2006 550F MXZ REV, Team clutch, 1.5x121 track: This one is a keeper.
#8
Posted 04 February 2012 - 08:29 AM
#9
Posted 04 February 2012 - 08:55 AM
This thing was more consistant with rpms during breakin???
#10
Posted 04 February 2012 - 09:11 AM
#11
Posted 04 February 2012 - 09:48 AM
#12
Posted 04 February 2012 - 11:13 AM
CVT clutch cooling cover, secondary tower racewerx brace.
#13
Posted 04 February 2012 - 12:52 PM
not to change the subject, but did you notice much of a difference heat wise with the cvt cover ?2012 etec 800X dropped 400 RPM, on days when I mostly ride in the fields with prolonged and back to back operation at high speed and high RPM. No runs, just high speed and high rpm, up to WOT though.
CVT clutch cooling cover, secondary tower racewerx brace.
#14
Posted 04 February 2012 - 01:09 PM
not to change the subject, but did you notice much of a difference heat wise with the cvt cover ?
Installed it from the get go. But... I rode at the same pace with a friend that has the exact same sled, no add-on, and my clutches were quite cooler. Now, the brace should also help in keeping the clutches cooler, so it's hard to determine which is most effective but the combo seems give some good results.
#15
Posted 01 March 2012 - 09:57 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users











