19 replies to this topic

[Husqvarna]

07 Rev 800R 144 (tore in two)
installed the 146 camo x 2.5
7 tooth drivers 2.86 pitch
Smittys drop brackets (dropped 1" or so)
Reverse axle kit w/ 8" wheels (turned backwards of course)

I dont have any issues with the swap, just change the gearing back up a lil bit. good to go.

I'm sorry, I just got done with this post and realized you are starting with a shorty.

[DirtballXRS]

LOl no problem good info thou going with the same set up basically.2.5 track peak thou just need to kno shaft size so I can order some drivers

[Husqvarna]

I believe it was 1 1/8" and the drivers were 1 1/16" for a tight fit (Wahl Bros. drivers). If you call they will tell you which ones you need but I'm fairly sure this was it.

[DirtballXRS]

K thanks ya been researching the site and that's Wat most people say not a lot of post with the size mentioned thou mostly drivers

[DirtballXRS]

Waiting on the drivers n track now thanks for everbody help let u kno how everything works out