Speedo and Tach
Posted 30 August 2011 - 12:00 AM
I have part numbers for the speedo and the tach from the work sled and the speedo/tach and from BRP's website for a 2008 Freestyle Pa :unsure:rk
I have pics from the work sled but was having trouble loading them.
Posted 16 March 2012 - 06:12 PM
They are same as in any other Rev. I think you also have to buy a different wiring harness to replace the stock Freestyle harness for models that did not come equipped with instruments.
The part numbers should be the same as your Park.
I "borrowed" the speedometer from the Tundra and put it in my Backcountry for troubleshooting purposes. They install in the panel with a simple quarter twist.
I broke the tach and picked one up from another Rev on eBay for about $40.
Speedometer new is $331. On a new speedometer you set the calibration for number of teeth when you first install it. According to the service manual, you can't change it later.
If you buy a used speedometer the only thing you need to watch out for is that it is calibrated for the 9 tooth sprocket, not 10 as used in most Revs. The Freestyle Backcountry also has 9, and some 550F Revs such as the GTX also used 9T. I'm pretty sure the short track Freestyle 550Fs have 10 because the short track MXZ and GSX 550Fs I checked have 10. You can find lots of used ones off MXZ 600HO or other overpowered speedsters, but not many people wreck sleds with 550F motors.
Posted 16 March 2012 - 07:29 PM
Posted 16 March 2012 - 07:49 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users