Project rider forward
Posted 10 April 2010 - 11:42 PM
TPI shift kit
hpg racing shocks
boyesen rage cages
1.25 ripsaw 144 studs with airlite backers
ceramic dynoport pipe and trail can, y-pipe
rev seat conversion
2000 mxz 600
2000 700 summit
Posted 12 April 2010 - 12:20 PM
Posted 12 April 2010 - 07:06 PM
x2 has anybody ever done this mod for real?? sounds like a fantastic idea!
hey can you take some pics of under the hood behind the air box of everything? it sounds like an awesome idea. im sorry i didnt read all your posts which i should do that but it does sound like a really good idea.put pics of were the steering connects to the shaft and what you had to do to make everything move like its supposed to. thanks
Posted 13 April 2010 - 09:22 PM
Check me out at: http://www.hookit.co...mbers/pembykid/
Posted 01 December 2010 - 07:02 PM
Posted 01 December 2010 - 11:09 PM
03 rev 800
boyesen rage cage reeds
Dynamo Joe clutch kit
Posted 01 December 2010 - 11:54 PM
your seat look's good, i used 1 of those led light's and did not like it . the person's behind me had a very hard time seeing it, so i went with a ds450 brakelight, also i first used wood block's for spacer's as you did, then realized that they might rot, so i replaced them with coposite decking and painted them with krylon fusion.
This is perfect. Makes me want to do it. I have a buddy that has a rev seat and trunk laying around. I might buy them. I am 6'4" and worried about feeling cramped with the rev seat conversion.
Posted 02 December 2010 - 06:08 AM
You will unless you move the bars up. My opinion. As it is now, when I turn the bars hit my ribs.
I am 6'4" and worried about feeling cramped with the rev seat conversion.
Posted 02 December 2010 - 04:30 PM
Posted 02 December 2010 - 06:58 PM
Posted 20 January 2011 - 10:05 PM
Posted 20 January 2011 - 10:08 PM
Posted 20 January 2011 - 10:11 PM
Posted 20 January 2011 - 10:13 PM
Posted 20 January 2011 - 10:15 PM