Ski-Doo Snowmobiles Forum banner

restoring old tundra

1K views 5 replies 5 participants last post by  bri113 
#1 ·
Hello all. I am new to Doo Talk, and have already picked up a helpful tip or two. I had a 1987 Tundra LT given to me that I have decided to restore. It runs fine, the track is good, etc. It needs a lot of cosmetic work and such. I am a machinist/welder/mechanic for over 30 years, so I can make most anything. I am going to use it for ice fishing and carrying feed for livestock. So far I have been able to find all the parts I need online except for clutch parts. I'm not sure yet if the clutch is just sticky from lack of use or if it's worn out. If it is worn out and I need to replace the "pucks" and such, any tips on where to get that stuff? Do BRP dealers still have parts like that for machines that old? And, is this a topic for this forum or would I be better off putting this in the vintage sled forum? Thanks in advance.
 
#2 · (Edited by Moderator)
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top