|
|
|

The following items are products made by DOOTalkers for DOOTalkers. Please remember, these items are offered and created by folks that are not in the business of selling sled parts. They are fellow members that made something cool they thought would be of interest to other site members.
|
|
OIL TANK INSERTS>
ALUMINUM INSERTS WILL FIT SKI-DOO, ARCTIC CAT, AND POLARIS
(CONTACT ME FOR ARCTIC CAT AND POLARIS MODEL FITMENT) ...
THIS PART WILL RESHAPE THE OIL RESERVOIR OPENING BACK TO ROUND TO HELP STOP LEAKS ... DESIGNED TO FIT OEM OIL CAPS AND RESERVOIRS
TYPE #1 -- fitment 2008/current XP chassis
TYPE #2 -- fitment 2003-2007 REV chassis
TYPE #3 -- any 2003/older SKIDOO (ZX, CK, and S chassis) and most ARCTIC CAT and POLARIS models
$15.00 each US FUNDS ( shipping included ) shipped anywhere in NORTH AMERICA
please add 5% ($.75 per part) to the total if using PAYPAL
my PAYPAL address is DAN_03REV@YAHOO.COM
send cashiers check, personal check, or money order to:
DAN PARCEL
609 N. WOOSTER ST.
ALGONA, IA 50511
please let me know your full name, shipping address, and sled(s) year/model with payment ... all orders are shipped USPS MAIL within 24 hrs. of received payment ..
any questions ??? > email DAN_03REV@YAHOO.COM ..
THANK YOU .. DAN03REV | Click on an image for a larger view | |
|
|
Fuel pressure gauge kit for all SDI sleds
Matches SKIDOO gauges
This Fuel pressure gauge kit comes complete with detailed instructions and pictures.
$150.00 for gauge, Carbon Fiber gauge pod, steel braided hose, and "T" fitting kit.
All orders add $10.00 for standard UPS ground shipping. Will ship to Canada,
But must have the postal code to give shipping estimate
PM: Skidoojunky or Danimal for orders
If any questions call Dustin @ 217-202-6055 or Dan @ 217-418-9390 | Click on an image for a larger view
 | |
|
|
| For all rev and rev xp models. Offer large weight reduction with no power loss. Feature 100% stainless steel construction. Lifetime weld warranty. Many happy customers. Very loud. Will be offering quieter version soon. 215.00 shipped in the states 225.00 to Canada. Also feature special cans for race sled. Email me at
fiis300jw@aol.com. Stock rev can weighs 11 pounds. Our rev can weighs 3.11 pounds. Stock XP can weighs 15.6 pounds. Our XP cans weigh 3.13 pounds. Big time weight loss! | Click on an image for a larger view
 | |
|
|
Risers are CNC machined from 6061 T-6 aluminum billet.
5/16-18 stainless allen cap screws hold on the end caps with nearly 3/4" of thread engagement for a very secure bar clamping arrangement.
Risers are 3/4" thick and 1 1/4" wide at the narrowest point. These are some of the strongest risers on the market today.
Easily polished to a mirror finish.
A special knurled and powder coated adapter tube will be required for machines without a 'T-bar' style steering post.
Contact me with any questions
3" - $70, 4" - $70, 5" - $80, 6" - $90, 7" - $105, 8" - $120, 10" - $150
Knurled, powder coated adapter tube (if required) - $12
Shipping & handling - $5/package for 3"- 6", $8/pkg for 7"- 10" Additional $5 to Canada
| Click on an image for a larger view
| |
|
|
Jet Kits for MXZ 800 HO Power T.E.K. PRICE $39.95 USD Shipped
Jet Kits for 03-07 SKIDOO Rev MXZ 800 HO and MXZ 800 HO Power T.E.K.
machines.
These Jet kits will stop the awful back firing, high idles, mid range lean
conditions causing detonation (rattling the y-pipe bolts out) , and leaning
out on top end causing engine failures.
Ski-doo does not calibrate the 800 HO Series III motors for proper fuel
mixture. The lean pilot jets and lean mid range (part throttle) for MPG
caused by the tapered needle and aggressive ignition curve. It is this
condition that causes detonation (pinging) and rattles the Y-Pipe bolts out
and cracks the Y-Pipe.
Re-calibration of the carburetor jetting for all 800 HO and Power T.E.K. is
required for reliability.
All kits are OEM Mikuni Parts:
03-05 Rev MXZ 800 HO Jet Kit - $29.95 (kit includes 2 Main Jets, 2 Pilot
Jets and directions)
03-07 Rev MXZ 800 Power T.E.K. - $39.95 (Kit includes 2 Main Jets, 2 Pilot
Jets, 2 Needle Shims and Directions)
All kits can and will be calibrated for you sled configuration, stock,
piped, shaved or aftermarket Head, etc.
I can also put together kits for XP models (closer from factory) and ZX
chassis if requested.
I accept Personal Checks, Pay-Pal & Money Orders.
My PayPal & E-Mail Address: helencapri85@sbcglobal.net
Thanks mxzx800imp | Click on an image for a larger view
 | |
|
|
Custom windshield for 2008 Ski-Doo XPX or TNT models. Available in solid black - custom colors by request. I have been riding and working on Ski-Doo machines for over 20 years. I originally designed this windshield for my own sled because I wasn't crazy about the stock windshield. The windshield will fit low base only and is 4" higher than stock.
Shipping within the US is $9.00 - shipping to Canada is $13 | Click on an image for a larger view
 | |
|
|
QRS Shim Package
In testing, this kit has shown to reduce belt temps up to 70*f, increase
belt life and provide more consistent RPM's. Between my personal sled
and the 3 different test sleds have shown zero belt wear with a total
test mileage of 3450. Test sleds where a 08 TNT, 08 MXZ-X800R, 08 Summit
800R run @ 1000 – 10000 ft elevations, aggressive trail riding as well
as mile after mile of WFO powder riding.
The QRS shim package consists of 5 bearing shims and 3 spacers to
support the inner race of the upper chain case bearing. With this
package you will be able to shim the secondary 2-5mm and have the proper
spacers to support the upper chain case bearing and prevent any oil loss
through the upper seal as well as bearing failure due to unnecessary
side load.
Simple 20 minute install.
Price will be $45.00 shipped in the lower 48 and $55.00 shipped Canada and Alaska
Pay will be accepted to Dynamicrecovery@comcast.net
Contact Email:
Dynamicrecovery@comcast.net
| Click on an image for a larger view
| |
|
|
Rear axle kits:
Rear Axle kits for '05 and below are available in Red, Blue or clear. Base price is 75.00 Color is 10.00 Additional
Rear axle kits for '06 to current are available in Blue, Red or clear. Base price is 60.00 color is 10.00 Additional
Shipping is included on all items to Canada/US/Alaska Other countries shipping is not included.
Please contact me for ordering and payment information. | Click on an image for a larger view
 | |
|
|
Snow shooters Oil-lite A-arm bushings sets
-A set of 16 custom made Oil-lite bronze bushings to replace the cheap factory plastic ones.
-Precision machined to fit with no modifications to A-arms or sleeve bushings.
-Removes all the slop in the front A-arms providing more precise handling.
-A must for all REV owners!
You must specify what model sled as the XP sets are different then the original REV and RT models.
I accept paypal, check or money order.
-Original REV and RT bushings, set of 16 (enough to do one sled) $79.00
-New XP bushings, set of 16 (8 upper and 8 lower...they are different) $89.00
Shipping is a flat $5.00 in the States and $10.00 for Canada.
Email me for ordering info. | Click on an image for a larger view
 | |
|
|
- Allows for Skidoo gas caddy and most OEM and aftermarket bags.
- Aluminum bar is a ¾ inch hollow to allow for running electrical inside.
- Standard dimensions are for the Rev Renegade and are: Rear bar to the front of the mount plate 21 inches, Width is 17 inches, comes in 2 heights low profile (bar center is 3.5 inches above tunnel) and a higher profile (bar center is 4.5 inches above tunnel)
- Plate can be added for mounting an LED light as shown below.
- Box can be prepped for a standard 6 inch oval light, you can pick a replacement up at any truck stop.
- Can be Modified for a 121 inch sled all the way to a 163 summit with minor modifications.
- Does not come with an LED light! I can help you in locating a few and it can be customized for one that you pick.
- Shipped USPS Priority mail to the Continental 48 for $12, all others will be quoted.
- Acceptable payment methods; Money Order, Personal check, Paypal ($5 surcharge)
- Powdercoating is available, currently working with Monster Performance.
| Click on an image for a larger view
 | |
|
|
| Shock Service in the Detroit area (no shipping at this time) for Dootalk members all HPG shocks serviced for $30. Includes clean & inspect, new seals, fluid ( I use Amsoil) and charge to factory spec with nitrogen. No extra charge for piggyback or remote reservoir. | Click on an image for a larger view | |
|
|
Move your sled around with ease with the Tom White Wheel Kit.
>Fit REV models only.
>Require no tools/hardware for attachment. Complete installation in less than 30 seconds.
>Allow sled to move over rough ground.
>Easy loading/unloading on trailer and remain installed during transport.
>Rear wheels allow track to be spun during warm-up (no need for lift or stand).
>Front wheels can be installed on the insides of steering spindles to allow sled to be stored next to a wall in the shop or trailer.
>Include make, model and year on your order. | Click on an image for a larger view
 | |
|
|
The "Stuff by DOOTalkers" page is intended as a means for inventive DOOTalk.com
members to offer their product to other site members. This feature is limited to
individuals that are not in the snowmobile parts and accessories business in any way.
That means if you have a website, a business card, a business phone, or a business name,
you do not qualify to use this feature to promote your product.
Use our
Contact Form to request more information about the
cost of listing your product on this page.
|
|
|
|
|
|
|
|
|
All Ski-Doo ~ All The Time
|
| ©2002 - 2009 DOOTalk, LLC |
|
|
|
|